Information

- 10 -
- 11 -
1 Capacitors
2 Male header
3 LCD
 C1 : 1µF
 C2 : 1µF
 C3 : 1µF
 C4 : 1µF
 C5 : 1µF
 C6 : 1µF
 C7 : 1µF
 C8 : 1µF
 C9 : 1µF
 C10 : 1µF
Be careful when soldering
the LCD connections.
Overheating will damage
the LCD screen.
Be careful when soldering
the LCD connections.
Overheating will damage
the LCD screen.
!
II. ASSEMBLY
1. Roughen the 4 bolts with a knife, a le or some abrasive paper so it will be easier to solder them to the front panel.
2. Assemble the unit but do not yet tighten the bolts (g.1).
3. Position the unit onto the rear of the front panel with the display is centred in the cut-away.
Temporarily x the unit to the rear using non-permanent tape (g. 2
Construction
Display module
Mount the female
connector on the
component side,
solder on the display
side !
Follow these steps for correct soldering
SMD components.
��������������������������� ��������������������