Information

- 14 -
- 15 -
EX. CONNECTED TO SPEAKER OUTPUT
HINT FOR STEREO CONNECTION
SIGNAL
TO K8098
I V. USE
SET-UP MENU
Access to the Set-up menu by a “long” push
on the ‘mode’ button.
• Short press: changing settings
• long press: next function
• Keep pressed: save changes and exit
Speed: refreshing the screen (Fast - Mid - Slow)
Impedance: “2”, “4” or “8” ohms for speaker output power calculation, in case the
unit is connected to speaker output.
Power: “AUTO” range or a maximum value that depends on the chosen impedance.
•Forimpedance=2:Possiblechoicesare“1200mW”,“12W”,“120W”or“1200W”
•Forimpedance=4:Possiblechoicesare“600mW”,“6W”,“60W”or“600W”
•Forimpedance=8:Possiblechoicesare“300mW”,“3W”,“30W”or“300W”
Sticky Bar: “Yes” or “No”. When selected, small residual sticky bars appear also on
the third octave spectrum screen.
Spectrum dB: “dBu” or “110 dB”. (110 dB stands for the “Power dB” display which
can range from 80dB to 110dB max, depending on the selected Power range).
Advanced settings: see pag. 16
Short press on the ‘mode’ button: selecting a meter-display.
Long press on the ‘mode’ button: opening the set-up menu.
Use
��������������������������� ��������������������