USER MANUAL EN RFM69HCW transceiver breakout board WPI348 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
What is Arduino® Arduino® is an open-source prototyping platform based on easy-to-use hardware and software. Arduino® boards are able to read inputs – light-on sensor, a finger on a button or a Twitter message – and turn it into an output – activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by sending a set of instructions to the microcontroller on the board.
Features • Compatible with 3.
Connecting Arduino® Connect the WPI348 module to the Arduino® as depicted below. We will only connect one temperature sensor to one Arduino®. Programming 1. Download the RadioHead library here and add it to the Arduino® IDE. 2. Go to GitHub and download both codes here. 3. Open the RF69_CLIENT_SEND_DATA code and upload to the Arduino® with the temperature sensor.
4. Open a new IDE with the RF69_SERVER_RECEIVE_DATA code and upload to the Arduino® without the temperature sensor. You should see following output: Now, it’s time to try and send data using all kinds of sensors, e.g.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPI348_v01 Velleman Group nv, Legen Heirweg 33 - 9890 Gavere.
