MANUAL EN TDS (TOTAL DISSOLVED SOLIDS) WATER QUALITY SENSOR WPM356 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview Use this sensitive measurement board to determine the quality of water based on its total dissolved solids or TDS. Find out whether your tap water is clean, or keep an eye on your aquarium water, and more! This set includes the measurement board as well as a detachable water-proof measurement probe of 60 cm. The board has a standard 3-pin header interface connector and has a simple analog voltage readout.
Example program You can download the example Arduino® program by going to the official Whadda github page: github.com/WhaddaMakers/TDS-water-quality-sensor 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file, and browse to the example_code folder. Open the example Arduino® sketch (example_code.ino) located in the folder. 3.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPM356 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
