MANUAL EN 3-CHANNEL HIGH POWER MOSFET MODULE WPM357 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview This module allows any digital circuit or microcontroller with 5 V DC outputs to easily switch high current DC loads. It can be used to drive loads such as high power LEDs, heaters, motors, solenoids, etc… (it is recommended to add freewheeling diodes when switching inductive loads like motors and solenoids). The module uses 3 high current IRF540NS MOSFETs to safely and efficiently switch these loads on and off.
Example program You can download the example Arduino® program by going to the official Whadda github page: github.com/WhaddaMakers/3-Channel-MOSFET-module 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file, and browse to the example_code folder. Open the example Arduino® sketch (example_code.ino) located in the folder. 3.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPM357 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
