MANUAL EN DIGITAL LED STRIP DRIVER MODULE WPM456 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview The Whadda digital LED strip driver module is designed to make it easy to drive and switch 12 V LED strips with 5 V devices such as Arduino® compatible boards. The module features a step-up boost converter which is designed to convert a 5 V input voltage to 12 V to drive the LED strip. The signal pin on the module can be used to switch the converter on or off when applying a HIGH or LOW input signal respectively.
Example program You can download the example Arduino® program by going to the official Whadda github page: github.com/WhaddaMakers/Digital-LED-strip-driver-module 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file, and browse to the example_code folder. Open the example Arduino® sketch (example_code.ino) located in the folder. 3.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPM456 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
