MANUAL EN 2 CHANNEL SOLID STATE RELAY MODULE WPM463 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview The Whadda two-channel Solid State Relay (SSR) module can be used to quickly and efficiently switch AC loads on and off without using any moving parts (e.g. like a classic electromechanical relay). The SSR module uses a phototriac to provide a galvanic isolation between the logic level side and the AC load side.
Example program You can download the example Arduino® program by going to the official Whadda github page: https://github.com/WhaddaMakers/2-Channel-solid-state-relay-module 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file, and browse to the example_code folder. Open the example Arduino® sketch (example_code.ino) located in the folder. 3.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPM463 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.
