Datasheet

PN532_C1 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.6 — 28 November 2017
115436 4 of 222
NXP Semiconductors
PN532/C1
Near Field Communication (NFC) controller
3. Applications
 Mobile and portable devices
 Consumer applications
4. Quick reference data
[1] DV
DD
, AV
DD
and TV
DD
must always be at the same supply voltage.
[2] The total current consumption depends on the firmware version (different internal IC clock speed)
[3] With an antenna tuned at 50  at 13.56 MHz
[4] The antenna should be tuned not to exceed this current limit (the detuning effect when coupling with
another device must be taken into account)
Table 1. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
V
BAT
battery supply voltage 2.7 - 5.5 V
ICV
DD
LDO output voltage V
BAT
>3.4V
V
SS
=0V
[1]
2.7 3 3.4 V
PV
DD
Supply voltage
for host interface
V
SS
= 0 V 1.6 - 3.6 V
SV
DD
Output voltage
for secure IC interface
V
SS
= 0 V
(SV
DD
Switch Enabled)
DV
DD
-0.5 - DV
DD
V
I
HPD
Hard-Power-Down
current consumption
V
BAT
=5V - - 2 A
I
SPD
Soft-Power-Down
current consumption
V
BAT
= 5 V,
RF level detector on
--45A
I
DVDD
Digital supply current V
BAT
=5 V,
SV
DD
switch off
[1]
-25-mA
I
SVDD
SV
DD
load current V
BAT
=5V,
SV
DD
switch on
--30mA
I
AVDD
Analog supply current V
BAT
=5 V - 6 - mA
I
TVDD
Transmitter supply current During RF transmission,
V
BAT
=5 V
-60
[3]
150
[4]
mA
P
tot
Continuous total
power dissipation
T
amb
=-30to+85C
[2]
--0.5W
T
amb
ambient temperature 30 - +85 C