User Manual

ManualsBrandsWhalen Furniture ManualsFurniture & DecorWhalen Furniture - Tower Stand for TVs Up to 32" - Medium Brown Cherry

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2017-04-09 Rev. 0001-A Factory: FOCIDI

Audio Video Tower

Model # BBAVT27-MBC

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday

Or visit our website 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

Summary of content (11 pages)

PAGE 1
LOT NUMBER: DATE PURCHASED: / / Audio Video Tower Model # BBAVT27-MBC ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m. - 4:30 p.m.
PAGE 2
M AX I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Audio Video Tower (BBAVT27-MBC) MADE IN CHINA FITS UP TO MOST 32” FLAT PANEL TVs MAXIMUM LOAD 80 lb. (36.2 kg) PLACE TV BEHIND THE STOPPER MAXIMUM LOAD 50 lb. (22.6 kg) THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT.
PAGE 3
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel (Qty. 1) D- Bottom Shelf (Qty. 1) B- Upper Middle Shelf (Qty. 1) E- Back Frame (Qty. 1) G- Right Leg (Qty. 1) C- Lower Middle Shelf (Qty. 1) F- Left Leg (Qty. 1) H- Cable Wheel (Qty. 2) (1) 5/8” Bolt (Qty. 4+1 extra) (2) 1” Bolt (Qty. 4+1 extra) (3) 1-1/4” Bolt (Qty. 16+1 extra) (4) Lock Washer (Qty.
PAGE 4
Assembly Instructions A E UP B A 3 4 5 E A/B UP E 1-1/4” Bolt (4 used in this step) Lock Washer (4 used in this step) Flat Washer (4 used in this step) ④ ③ ⑤ NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. 1. Unpack the unit and confirm that you have all the hardware and required parts. 2.
PAGE 5
Assembly Instructions C E UP 3 4 5 D C/D E E UP 1-1/4” Bolt (4 used in this step) Lock Washer (4 used in this step) ④ ③ Flat Washer (4 used in this step) ⑤ 5. Attach the Lower Middle Shelf (C) and Bottom Shelf (D) to the Back Frame (E) with four 1-1/4” Bolts (3) and four Washers (4 and 5).
PAGE 6
Assembly Instructions F A B C D G F/G B/C/D 5 4 1-1/4” Bolt (8 used in this step) 3 Lock Washer (8 used in this step) ③ Flat Washer (8 used in this step) ④ ⑤ 6. Align and attach Left Leg (F) to the Lower Shelf Frames (B, C and D) with four 1-1/4” Bolts (3) and four Washers (4 and 5). 7. Repeat the same procedure to attach the Right Leg (G) on the other side.
PAGE 7
Assembly Instructions F A G 2 4 5 1” Bolt (4 used in this step) A F/G Lock Washer (4 used in this step) ② ④ Flat Washer (4 used in this step) ⑤ 8. Fasten the Top Panel (A) into place with four 1” Bolts (2) and four Washers (4 and 5).
PAGE 8
Assembly Instructions E H E 1 5/8” Bolt (4 used in this step) ① 9. Stand the unit upright. 10. Attach 2 Cable Wheels (H) onto the backside of the Back Frame (E) and tighten with the enclosed hex wrench. 11. The cable wheels allow you to organize, route and separate your component cords and cables to minimize tangling and signal interference.
PAGE 9
Assembly Instructions A A A Acrylic Stopper (1 used in this step) ⑥ NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the console. 12. Remove the paper backing from the acrylic stopper (6), then properly align the acrylic stopper into the cut-out on the acrylic stopper template on the top panel (A). Press down on the acrylic stopper to help adhesion. 13.
PAGE 10
Assembly Instructions Tools required: hex wrench (provided), Phillips screwdriver, mallet, power drill, and 3/8” drill bit. 14. Position the assembled unit at the desired location against a wall. If necessary, adjust the preattached Floor Levelers at the bottom of the Legs (F and G) to level the unit. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraint to the Back Frame and the wall.
PAGE 11
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Always use coasters under beverage glasses and flowerpots. Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently.