TM Series OPERATING MANUAL AND USER GUIDE www.wharfedalepro.com connect series user manual.
OPERATING MANUAL AND USER GUIDE TABLE OF CONTENTS Important Warnings & Safety Information...........................................................................2 Introduction.........................................................................................................................4 About The Connect Series.................................................................................................4 Common Features........................................................................
CONNECT 502/802 IMPORTANT WARNINGS & SAFETY INSTRUCTIONS 1. Read these instructions 2. Follow all instructions 3. Keep these instructions 4. Heed all warnings 5. Do not use this apparatus near water 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
OPERATING MANUAL AND USER GUIDE ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR 19. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside.
CONNECT 502/802 INTRODUCTION Congratulations on the purchase of your Connect Series mixer. Connect Series mixers are the result of many years of experience in the use, design and manufacture of professional audio equipment. We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with your sound.
OPERATING MANUAL AND USER GUIDE CONNECT 502 FEATURES • 1 Mono Mic/Line Channel and 2 Stereo Channels • Input Gain Controls On Mic/Line Channels • 2 Band EQ (Mono Channel Only) • 2 Track Stereo Inputs And Outputs With ⅛” And RCA Jacks • 2 Track Destination Switches CONNECT 802 FEATURES • 2 Mono Mic/Line Channels and 2 Stereo Channels • Input Gain Controls On All Channels • 3 Band EQ On All Channels • 2 Track Stereo Inputs And Outputs With ⅛” And RCA Jacks • 2 Track Destination Switches 5 connect series u
CONNECT 502/802 MONO CHANNEL WALKTHOUGH 1 2 3 4 1. Balanced XLR input for connecting microphones 2. Balanced/Unbalanced TRS input for line level sources 3. Gain control for calibrating sources and applying correct gain structure 4. Clip LED. Shows when clipping is occurring 5. High EQ centred at 12KHz 6. Mid EQ centred at 1KHz (Connect 802 only) 7. Low EQ centred at 80Hz 8. Used to spatially place the channel within the stereo field 9.
OPERATING MANUAL AND USER GUIDE MASTER SECTION WALKTHOUGH 1 1. Balanced/unbalanced TRS main outputs 2. For connecting headphones 2 3. 2-Track inputs for playback devices (1/8” jack takes priority) 4. 2-Track outputs for recording devices (1/8” jack takes priority) 3 4 7 6 5 8 10 9 5. Indicates +48v phantom power activity 6. Indicates AC power supply 7. Controls the level of the 2-Track inputs 8. When depressed sends the 2-Track input to the headphone outputs 9.
CONNECT 502/802 How to use FX WIRING DIAGRAM TYPICAL WIRING DIAGRAM FOR THE CONNECT 802 SIGNAL INPUT MIC,CD etc.
OPERATING MANUAL AND USER GUIDE CONNECT 802 DIMENSIONAL DRAWING 9 connect series user manual.
CONNECT 502/802 CONNECT 502 DIMENSIONAL DRAWING 10 connect series user manual.
OPERATING MANUAL AND USER GUIDE CONNECT 502 BLOCK DIAGRAM 11 connect series user manual.
CONNECT 502/802 CONNECT 802 BLOCK DIAGRAM 12 connect series user manual.
OPERATING MANUAL AND USER GUIDE SPECIFICATIONS Model CONNECT 502 Maximum Output Level +22dBu Maximum Headphone Output Level >150mw @ 32 ohms THD <0.
CONNECT 502/802 Model CONNECT 802 Maximum Output Level +22dBu Maximum Headphone Output Level >150mw @ 32 ohms THD <0.
Wharfedale Professional IAG HOUSE, Sovereign Court, Ermine Business Park Huntingdon, Cambs, PE29 6XU, England www.wharfedalepro.com Wharfedale Professional reserves the right to alter or improve specifications without notice. All rights reserved © 2011 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group. connect series user manual.
