User Manual

CONNECT 502/802

MONO CHANNEL WALKTHOUGH

1. Balanced XLR input for connecting microphones

2. Balanced/Unbalanced TRS input for line level sources

3. Gain control for calibrating sources and applying correct gain structure

4. Clip LED. Shows when clipping is occurring

5. High EQ centred at 12KHz

6. Mid EQ centred at 1KHz (Connect 802 only)

7. Low EQ centred at 80Hz

8. Used to spatially place the channel within the stereo eld

9. Sets the amount of signal sent to the main output bus

1. Balanced/Unbalanced TRS input for the left channel or mono line level

sources

2. Balanced/Unbalanced TRS input for the right channel of stereo line

level sources

3. Gain control for calibrating sources and applying correct gain structure

(Connect 802 only)

4. High EQ centred at 12KHz (Connect 802 only)

5. Mid EQ centred at 1KHz (Connect 802 only)

6. Low EQ centred at 80Hz (Connect 802 only)

7. Used to spatially place the channel within the stereo eld

8. Sets the amount of signal sent to the main output bus

STEREO CHANNEL WALKTHOUGH

connect series user manual.indd 7 2011-6-16 9:38:48