SR806 Live Sound Mixer SR806 Live Sound Mixer OPERATING MANUAL www.wharfedalepro.
OPERATING MANUAL TABLE OF CONTENTS IMPORTANT WARNINGS & SAFETY INSTRUCTIONS.............................................................2 TABLE OF CONTENTS...............................................................................................................3 INTRODUCTION.........................................................................................................................4 SR806 MIXER OVERVIEW........................................................................................
SR806 Live Sound Mixer IMPORTANT WARNINGS & SAFETY INSTRUCTIONS 1. Read these instructions 2. Follow all instructions 3. Keep these instructions 4. Heed all warnings 5. Do not use this apparatus near water 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
OPERATING MANUAL ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR 19. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
SR806 Live Sound Mixer INTRODUCTION The Wharfedale SR806 Mixer is the result of many years of experience in the use, design and manufacturing of professional sound reinforcement products. We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with your sound.
OPERATING MANUAL KEY FEATURES - Internally impedance balanced circuitry - 8 mono channels with studio quality mic preamps - 5 - 8 XLR / TRS inputs with HPF - Channel gain controls - TRS inserts - 3 band EQ with parametric mid band - Pan control - Phantom power - 25dB Pad button 4 Stereo channels - TRS inputs - Channel gain controls - 4 band EQ - Balance controls - 4 stage metering per channel - Dual 12 stage master metering - 4 sub groups - Group and main buss buttons
SR806 Live Sound Mixer SR806 MIXER FRONT PANEL 6
OPERATING MANUAL MONO CHANNELS WALK THROUGH 1. Balanced XLR connector for microphones. 2. Pad - reduces the input by 25dB. Use this when the input is 1 overloaded by high output sources. 3. Line input - ¼” balanced/unbalanced TRS input for line level 2 3 sources. 4. Insert point - ¼” TRS jack with tip input and ring output. Allows you to place external signal processors such as compressors and gates 4 between the microphone preamp and the EQ stage. 5.
SR806 Live Sound Mixer STEREO CHANNELS 1. Left/Mono input - use this ¼” TRS input to connect a mono line level device or the left output of a stereo line level device. 2. Right input - use this ¼” TRS input to connect the right output of a 1 2 stereo line level device. 3. Peak indicator - illuminates when the input signal is too high. 4. Gain control - allows you to match the input sensitivity of the channel to your source. Ranges from -13dB to +25dB. 5.
OPERATING MANUAL OUTPUT SECTION 1. Group Outputs - individual line level outputs for each of the group busses. 2. Line In - stereo input for consumer devices such as CD players. 3. Lamp - for connecting a standard 12v BNC gooseneck lamp. 4. Sub/Aux output - direct output for the Sub/Aux buss. The LPF can be set at 80Hz or 120Hz or bypassed. This can be used to feed subwoofers or as an additional auxiliary buss. 5. Main Outputs - the main mix outputs.
SR806 Live Sound Mixer GROUP SECTION 1. FX 1 - sends signal from the group buss to the internal FX 1 1 2 processor. 2. FX 2 - sends signal from the group buss to the internal FX 2 processor. 3. Group fader - sets the overall level of the group buss. 3 MASTER SECTION 1 2 1. +48 - phantom power status LED, indicates that +48v phantom power is being sent to the XLR inputs. 2. Power - indicates that the system is receiving AC power and is operating. 3.
OPERATING MANUAL SR806.BLOCK 20080820.
SR806 Live Sound Mixer DIMENSIONAL DRAWINGS 12
OPERATING MANUAL WIRING DIAGRAM Mixer Output Microphone SR806 Mixer Professional Amplifier Loudspeaker B Loudspeaker A Amplifier Output 13
SR806 Live Sound Mixer SPECIFICATIONS Model SR806 MAXIMUM OUTPUT LEVEL (1% THD +22dBu @ 1kHz) Headphone Over 150mw @ 32 ohms THD+N (%) <0.
Wharfedale Professional IAG HOUSE, Sovereign Court, Ermine Business Park Huntingdon, Cambs, PE29 6XU, England www.wharfedalepro.com Wharfedale Professional reserves the right to alter or improve specifications without notice. All rights reserved © 2010 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group.
