Instruction Manual

OPERATING MANUAL AND USER GUIDE
The Q Series Equalizers are easy to install and operate.
Before plugging in the Q Series Equalizers, or any electrical audio device, be sure that the
power switch is in the off position, the volume control is all the way down (at 0 level) and all
audio connections are made.
After power-up, speak into your mic start the CD or MP3 player or other line level device
and slowly increase the volume to the desired level. Avoid distortion (or overdriving the
input) as it can damage your system in the long term. If you cannot achieve the desired
sound level in your system, you must add more speakers or a subwoofer to the system.
CONNECTIONS / WIRING
Connecting Q Series Equalizers to your system is straightforward. You simply plug in your
cables (microphone or line level) from the output of the mixer to the input of the EQ; then
from the EQ output to an amplifier. Always use good quality microphone (2 conductor +
shield) cable. After you plug in the components, you must adjust the sound level to produce
the best sound. A good place to start is the mixer then EQ then amplifier.
SETTING UP
7