™ PROFESSIONAL ACTIVE SUBWOOFER SYSTEM
™ TABLE OF CONTENTS Page 1……………………………………………… Unpacking - Warnings and Safety 2……………………………………………… Introduction 3……………………………………………… Warranty 4……………………………………………… Features 5……………………………………………... Description / Enclosure Features 6……………………………………………... Enclosure Call-Outs 7……………………………………………... Rear Panel Call-Outs 8……………………………………………... Operating Instructions Connection Suggestions 9……………………………………………... Connection diagram #1 10………………………………………….….. Connection diagram #2 11……………………………………….……..
™ UNPACKING All Wharfedale Pro products are fully checked before leaving the factory. After unpacking, inspect the contents for any physical damage. Retain the shipping carton and internal packing material. Check as soon as possible that the unit is functioning properly. In the event of any shipping damage, please contact your dealer and the shipper immediately to make a claim. WARNING AND SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS carefully before operating this product. 2.
™ INTRODUCTION: TITAN™ Sub-A15 Active Bandpass Subwoofer Congratulations! You’ve made the smart move of choosing the new Wharfedale Pro Titan™ Sub-A15, a powerful active subwoofer system designed to produce high quality audio in any performance application. A preeminent force in audio, with a long and distinguished history of innovation, Wharfedale Loudspeakers was founded in 1932 by Gilbert Briggs, who built his first loudspeakers in a small village in the county of Yorkshire, England.
™ WHARFEDALE PRO LIMITED WARRANTY Wharfedale Pro Titan Sub-A15 subwoofers are warranted to be clear of manufacturing or material defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for information. *Be aware that warranty details may differ from country to country. Contact your dealer or distributor for information. These terms do not infringe your statutory rights. Wharfedale Pro website: www.
™ TITAN Sub-A15 Band-Pass Active Subwoofer Features - Peak limiter that protects the amplifier and speaker from clipping. - 0°, 180° PHASE switch - Built-in 600 watt (peak), 400 watt (continuous) amplifier - Thermal, DC fault and short circuit protection - Power on and system AGC protect LED indicators - Integral preset limiter prevents clipping and distortion.
™ Titan Sub-A15 DESCRIPTION The TITAN Sub-A15 is powerful 15 inch band pass active subwoofer. A built-in 400 watt (continuous) 600 watt (peak) amplifier conveniently accepts stereo or mono line level inputs via dual, balanced, XLR-¼” “combo” connectors as well as a unique single channel 4Ω speaker level input via a ¼” phone jack which allows for use with a standard sound reinforcement amplifier (when the internal amplifier is not used).
™ Titan Sub-A15 – ENCLOSURE CALL-OUTS 1. Pole mount socket The top of the Titan Sub-A15 provides a convenient built in pole mount socket for easy mounting of a standard 35mm diameter speaker pole (such as the Wharfedale Pro SP-1) for easy top-side mounting of a mid/high passive or active speaker. 2. Integral Carry Handle The Titan Sub-A15 has two rubber over-moulded carry handles (one on each side) for easy transportation of the enclosure. 3.
™ Titan Sub-A15 – REAR PANEL CALL-OUTS 1. INPUT A - Balanced line level input via a XLR / ¼” combo connection. 2. OUTPUT A - Balanced male XLR connection provides output “THRU” or HIGHPASS signal (depending on switch setting). 3. SPEAKER LEVEL INPUT Allows for connection of the output of an external amplifier to use the Titan Sub-A15 as a passive subwoofer. NOTE: Disconnect the power cord when using the Titan Sub-A15 in this mode. 4. INPUT B - Balanced line level input via a XLR / ¼” combo connection. 5.
™ Titan Sub-A15 OPERATING INSTRUCTIONS The Titan Sub-A15 is easy to use! The steps below should be followed to help you get the best performance out of your subwoofer and speaker system. -Place the Titan Sub-A15 upright on its feet and place any pole mounts or additional speakers in place before making any wiring connections. -Make all audio connections (as outlined below and on subsequent pages) before turning on the power of any system components (see Page 1 “SETUP PROCEDURES”).
™ CONNECTION DIAGRAM # 1 STEREO SYSTEM WITH HIGHPASS OUTPUT TO RIGHT ACTIVE SPEAKER OR AMPLIFIER INPUT TO LEFT ACTIVE SPEAKER OR AMPLIFIER INPUT INPUT OUTPUT (BALANCED) (BALANCED) 0 I I I I I I A I I I Right Output WWW.WHARFEDALEPRO.
™ CONNECTION DIAGRAM # 2 USING THE Titan Sub-A15 WITH AN EXTERNAL AMPLIFIER INPUT OUTPUT (BALANCED) (BALANCED) 0 I I I I I A I TO SPEAKER LEVEL INPUT I I I WWW.WHARFEDALEPRO.
™ CONNECTION DIAGRAM # 3 USING TWO Titan Sub-A15's WITH TWO POWERED SPEAKERS TO LEFT MAIN POWERED SPEAKER FROM MIXER OUTPUT LEFT INPUT OUTPUT (BALANCED) (BALANCED) 0 I I I I I I A I I I WWW.WHARFEDALEPRO.
™ SPECIFICATIONS Model Name TITAN Sub-A15 System Type Band-pass subwoofer Frequency Response +/-3dB 45-150Hz Enclosure Material 18mm Plywood Enclosure Colour Grey Frame material Die-cast aluminium frame Size (mm / inches) 404mm / 15” Coil Size (mm / inches) 75 / 3” Impedance 4 ohm Speaker Pole Adapter Yes Inputs A & B - Type / Connection Balanced Line Level inputs via two combo connectors Output A & B Type / Connection Balanced Line Level outputs via two XLR-M connections Input Sensi
13 LEFT SIDE VIEW 640.00 630.00 BOTTOM VIEW 478.00 FRONT VIEW 478.00 TOP VIEW RIGHT SIDE VIEW 640.00 630.00 ™ BACK VIEW 478.00 630.00 640.00 640.
Wharfedale International LTD. IAG HOUSE Sovereign Court, Ermine Business Park, Huntingdon, Cambs, PE29 6XU, England www.wharfedalepro.com IAG Professional reserves the right to alter or improve specifications without notice.
