Operating instructions

™

WARNING AND SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS carefully before operating this product.

2. RETAIN these instructions for future reference.

3. COMPLY WITH WARNINGS – All warnings and instructions for this product

should be adhered to.

4. SETUP PROCEDURES – In order to avoid speaker damage, it is advisable to

establish and follow a pattern for powering on and off a sound system. Make sure that

all input and output level controls are at their minimum settings on all components of

the system. With all system parts connected, power on source equipment (playback

units, instruments, mixers, signal processors, etc.), BEFORE powering on any

amplifiers or powered speakers. Power on the system’s amplifier(s) or powered

speakers LAST. Wait until all system components have stabilized, then bring up

volume controls to operating level. Similarly, when shutting a system down, always

turn down all level controls and then turn off the amplifier(s) or powered speakers

BEFORE shutting down other system components.

5. CABLES – Be sure to use proper cables for all connections.

6. RIGGING – SUSPENDING – MOUNTING IS NOT RECOMMENDED FOR

THIS PRODUCT! The rigging, suspension or mounting of any speaker system can

expose members of the public to serious health risks and even death. UNDER NO

CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT

SPEAKERS UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO

BY RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT

SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY

QUALIFIED OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT

QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.

7. CAUTION – These professional loudspeaker systems are capable of

generating very high sound pressure levels. Use care with placement and operation to

avoid exposure to excessive sound levels that could cause permanent hearing

damage.

8. SERVICING – The user should not attempt to service this product. Please

contact your local Wharfedale Pro Service Center.

UNPACKING

All Wharfedale Pro products are fully checked before leaving the factory. After

unpacking, inspect the contents for any physical damage. Retain the shipping carton

and internal packing material. Check as soon as possible that the unit is functioning

properly. In the event of any shipping damage, please contact your dealer and the

shipper immediately to make a claim.