XO Series Crossovers XO Series Crossovers OPERATING MANUAL AND USER GUIDE XO - 204 / XO - 206 www.wharfedalepro.
OPERATING MANUAL AND USER GUIDE IMPORTANT WARNINGS & SAFETY INSTRUCTIONS 1. READ ALL INSTRUCTIONS carefully and become familiar with the features and functions of these products before operating them. 2. RETAIN THESE INSTRUCTIONS for future reference. 3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to. 4.
XO Series TABLE OF CONTENTS 1. Important Warnings & Safety Instructions……………………………....….… 1 2. What about the XO Series Crossovers?………………………………………… 3 3. Introduction/Overview…………………………….……….............................. 4 4. Features……………………….…………………………………….……………..... 5 5. Setting up/ Connections/ Wiring……………………………………................ 7 6. Specifications …………………………………….………………………….……… 11 7. Dimensional Drawings…………………………………….............................. 12 8. Warranty…………………………..……....…………………………..……........
XO Series INTRODUCTION Wharfedale XO Series Crossovers are the result of many years of experience in the use, design and manufacturing of professional sound reinforcement products. We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with your sound.
OPERATING MANUAL AND USER GUIDE FEATURES 5 ♦ Two models: • XO-204 - 2-way • XO-206 - 3-way ♦ Variable Crossover Frequency: • XO-204: 60Hz – 1kHz with 10x switch • XO-206: 60Hz – 1kHz (LOW/MID), 1kHz - 9kHz (MID/HIGH) ♦ Variable Input Gain: ∞ to +6dB ♦ Easy to read LED meters ♦ 1/4” TRS Mono Subwoofer output (balanced/ unbalanced) ♦ 1/4” TRS balanced/unbalanced inputs/outputs ♦ Front panel switches for easy access: • HPF - 40Hz/ Flat • Mute for each output: low, (mid), high • Phase switch for
XO Series BLOCK DIAGRAM TYPICAL WIRING DIAGRAM FOR THE XO SERIES CROSSOVER IN SYSTEM SETUP SIGNAL INPUT MIC, CD etc.
OPERATING MANUAL AND USER GUIDE SETTING UP The XO Series Crossovers are easy to install and operate. Before plugging in the XO Series Crossovers, or any electrical audio device, be sure that the power switch is in the off position, the volume control is all the way down (at 0 level) and all audio connections are made. After power-up, you will need to set up the system; setting the crossover frequencies. Avoid distortion (or overdriving the input) as it can damage your system in the long term.
XO Series Crossover Adjustments: • The XO Series Crossovers are ideal tools to make set up and operation of your system easy and accurate. • Your best starting place is to follow the loudspeaker manufacturer ’s recommended crossover points. • Adjust the crossover points of the High Pass and Low Pass outputs to match the frequencies recommended by the manufacturer. • You will need to determine the correct output level of the low pass, the high pass and subwoofer outputs.
OPERATING MANUAL AND USER GUIDE Tuning the Room: A continuously variable frequency crossover is a very valuable tool for the traveling musician. It allows you to get the best sound in a variety of venues. As we know, all rooms are not created equal. They have their own personality. That is to say, your sound system will not sound the same from room to room. Using equalisers and crossovers correctly will help you maintain “your sound”.
XO Series SPECIFICATIONS XO-204 XO-206 Connectors: 1/4" TRS (pin 2 hot) 1/4" TRS (pin 2 hot) Input Impedance: Balanced 20k ohm, unbalanced 10k Balanced 20k ohm, unbalanced INPUT/ OUTPUT ohm 10k ohm Max Input Level: +20dBu balanced or unbalanced +20dBu balanced or unbalanced Output Impedance: Balanced/ unbalanced 100ohm Balanced/ unbalanced 100100ohm Max Output Level: +21dBu balanced/unbalanced into Subwoofer Output 1/4" TRS (pin 2 hot) 1/4" TRS (pin 2 hot) Frequency Range 60Hz-10kHz
OPERATING MANUAL AND USER GUIDE Dimensional Drawings XO-204 XO-206 11
XO Series WHARFEDALE PRO LIMITED WARRANTY Wharfedale Pro products are warranted of manufacturing or material defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for information. *Be aware that warranty details may differ from country to country. Contact your dealers or distributor for information. These terms do not infringe your statutory rights.
Wharfedale Professional IAG HOUSE Sovereign Court, Ermine Business Park Huntingdon, Cambs, PE29 6XU, England www.wharfedalepro.com Wharfedale Professional reserves the right to alter or improve specifications without notice. All rights reserved © 2008 Wharfedale Pro. Wharfedale Pro is a member of the International Audio Group (IAG).