User guide

OPERATING MANUAL AND USER GUIDE
7
MONO CHANNEL WALKTHROUGH
1. Balanced XLR input for connecting microphones
2. Balanced/Unbalanced TRS input for line level sources
3. Gain control for calibrating sources and applying correct gain
structure
4. High EQ centred at 12KHz
5. Mid EQ centred at 1KHz
6. Low EQ centred at 80Hz
7. Sends to the internal FX engine or to effect
8. HPF with 80Hz cutoff point
9. Used to spatially place the channel within the stereo eld
10. Sets the amount of signal sent to the main output bus
11. Clip LED. Shows when clipping is occurring
1
2
3
4
5
6
7
8
9
10
11
STEREO CHANNEL WALKTHROUGH
1. Balanced/Unbalanced TRS input for the left channel or mono
line level sources
2. Balanced/Unbalanced TRS input for the right channel of stereo
line level sources
3. FX to FX send or to effect
4. Select +4/-10dBu switch
5. Used to spatially place the channel within the stereo eld
6. Sets the amount of signal sent to the main output bus
1
2
3
4
5
6