HD Ready Digital LCD TV USER'S MANUAL Please read this manual carefully before using your television and keep this manual In a good place for future reference.
CONTENT Safety Notice ............................................................................................1 Front Panel Control................................................................................... 2 Connection .............................................................................................. 3 Remote Control ........................................................................................ 4-5 Remote Control ............................................................
Safety Notice To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television.
Front Panel Controls SOURCE MENU Or 2 3 SOURCE MENU VOL- VOL+ CH- 4 VOL- CH+ 5 VOL+ CH- STANDBY 1 CH+ POWER L15T11W-A, L15T11W-C, L19T11W-A, L19T11W-C, L20T11W-A,L20T11W-C, L22T11W-A,L22T11W-C L19T12W-A,L19T12W-C, L20T12W-A,L20T12W-C, 6 7 6 7 (The description of the button may be different, just see the real.) Control Panel Function 1. Standby switch 2.SOURCE Select the input signals: PC/COMPONENT/DVD/HDMI/ TV/SCART/S-VIDEO 3. MENU Press to select the main menu 4.
Connection Options DVD STOP PLAY/PAUSE OPEN/CLOSE ANT IN AUDIO IN Pr Pb Y PREV NEXT S-VIDEO DVD insert TV SCART VGA IN HDMI The above figure is for reference only, connections may differ depending upon the models Please see the real set of the DVD position COMPONENT Input Connect a component video/audio VGA /COMPONENT/device to these jacks SVIDEO Audio Input Connect the PC output connector from a PC to the audio input port ANT IN AUDIO IN Pr Earphone port Antenna Input Connect cable or antenna
Remote Control Key Functions(for TV/DVD Combi) When using the remote control, aim it towards the remote sensor on the TV Buttons on the remote control Stand By DVD Open/close STANDBY P.
Remote Control Key Functions(for TV only) When using the remote control, aim it towards the remote sensor on the TV Buttons on the remote control Stand By NICAM STANDBY SLEEP Q.VIEW NICAM DISPLAY MUTE Picture Mode Switch to PC mode PC AUTO AD Return the last watched program channel Mute 1 2 3 5 6 7 4 Automatically adjust in PC mode 8 Program Number SOURCE 9 0 -/-- Picture mode Source Exchange DTV/TV P.
Remote Control Key Functions Installing Batteries 1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions Make sure that there is no obstacle between the remote controller and television set. Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed.
Connection Instructions VGA Input You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; VGA IN 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC.
Connection Instructions COMPONENT (If connected to S-VIDEO,select the S-VIDEO external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. S-VIDEO Input - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.
Connection Instructions SCART Input 1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket. 2.Press SOURCE to select SCART mode. 3. Press Play button on external equipment and it should appear on the screen. SCART External equipment HDMI Input HDMI TV HDMI Devices Connect the cable from the HDMI devices to the TV HDMI, as shown in the figure. How to use 1. Select the iHDMI source by using the SOURCE button on the remote control. 2.
Basic Operating Instructions Turn on the LCD-TV POWER P.STD OPEN/CLOSE 10+ SCAN SWAP MUTE CALL 1 2 3 5 6 7 4 8 TV/AV 9 0 -/-DTV/DVD NICAM P+ V- V+ MENU ZOOM AUDIO PSTOP REV When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red.
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1. if you want to choose any channel from 0 to 9, please press the -/-- button until - is indicated on the screen and then press the relevant key on the remote control.
Menu Operations 1. Press MENU button to display the main menu, and V+/V-to select the main menu . 2. Press P+/P- to scroll through the options 3. Press V+/V- buttons to make changes to the parameters 4. Press the EXIT button to exit the menu Picture Menu Options Picture quality can be adjusted for any input separately . The picture quality on the screen can be adjusted as follows: 1. Press MENU button and V+/V- until the following menu appears on the screen. 2.
Menu Operations Picture Menu Options continued 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Functions: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture. CONTRAST : The image becomes higher as the number increase.
Menu Operations Audio Menu Options continued 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved . Functions : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from left to right .
Menu Operations Function Menu Options Menu Language Selection : The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU and V+/V- button until the following menu appears on the screen 2. Press P+/P- button to select LANGUAGE. 3. Press V+/V- button to select your desired language. From this point on, the on-screen menus will be shown in the language of your choice.
Menu Operations Function Menu Options Continued 4.DISPLAY MODE: To select the display mode between 4:3, 16:9 and FULL SCREEN 5.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds if there is no signal. 6. RESET : Press V+ to reset the settings to the factory default . 7. CHILD LOCK: Press V+ to enter it and the following appears on the screen: PASSWORD: ---- If password is correctly entered, the CHILD LOCK menu will be entered.
Menu Operations Adjust Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen ADJUST AUTO SYNC PHASE CLOCK H. POSITION V. POSITION 50 50 50 50 Note: This menu only appears in PC mode . 2. Press P+/P- button to enter the adjust menu and to go up and down to select the desired option 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved.
Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen TUNING TUNING PROGRAM COUNTRY UNITED KINGDOM AUTO SEARCH Note: This menu only appears in TV mode . 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved .. Functions: 1.
Menu Operations Tuning Menu Options Continued SKIP : If you want to skip a channel , press V+/V- to select ON , and this channel will be skip next time when you press P+/P- . But you can press digits button to select the channel . If you want to restore the channel , select OFF. AFC : Auto frequence control . Select ON to improve the image quality . FINE TUNE :Press P+/P- to select FINE TUNE item in menu . Then , press V+/Vbutton to adjust and improve the image quality .
DVB-T Main Menu Operations Press TEXT button to display the additional information. Press the DTV/DVD(DTV/TV) button on the remote control to enter the DVB status. 1. Press D.MENU button to display the main menu 2. Press / to scroll through the options 3. Press OK button to confirm enter the submenu 4. Press the D.MENU or EXIT button to exit the menu Channel List 1. Press D.MENU button , the main menu will appear. DVB-T Menu Channel List Favourites Now/Next EPG Timers Settings 2. Press / submenu.
DVB-T Main Menu Operations Favourite List 1. Press D.MENU button , the main menu will appear. DVB-T Menu Channel List Favourites Now/Next EPG Timers Settings 2. Press / sub-menu. 3. Then press 4. Press / button to select Favourites and OK button to confirm enter the / to select among List 1, List 2, List 3, List 4 and List 5. button to select the channel and OK button to set .
DVB-T Main Menu Operations Timers 1. Press D.MENU button , the main menu will appear. DVB-T Menu Channel List Favourites Now/Next EPG Timers Settings 2. Press / button to select Timers and OK button to confirm enter the sub-menu. 3. Press / button to select Mode/Name, and then press the options. / button to select 4. Press / button to select the other items, and then press the digits button to set the Start time, End time and Date. 5. Press / button to select Password and OK to set the password.
DVB-T Main Menu Operations Parental Setting Press / button to select it and OK button to confirm, then input 0000 to enter the sub-menu. Press / button to select Menu Lock, and / button to select the desired item. Press / button to select Set Lock Key and input digits button to set. Settings (continued) Language 1. Press D.MENU button , the main menu will appear. DVB-T Menu Channel List Favourites Now/Next EPG Timers Settings 2. Press / sub-menu. .
DVB-T Main Menu Operations Settings (continued) 3. Press / button to select Installation and OK button to confirm enter the sub-menu. Press / button to select Automatic Search. Press OK button to enter the sub-menu and press / button to select Yes or No then press OK to confirm. . 4. Press / button to select Manual Search and OK button to enter. Then input the Channel Number and OK to start to search, press D.MENU to exit. 5. Press / button to select First Time Installation and OK button to enter.
TELETEXT Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.). Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display.
TELETEXT Teletext Cancel mode This feature allows the TV picture to be displayed while next page to be searched is entered and found. Only the top teletext line is displayed until the page is found. Press the button to hide the teletext information. Either press the button or the Text button to exit the cancel display mode. Language change Pressing the button will change the Teletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automatically updating.
Basic Playback Basic Playback Preparations Press the DTV/DVD button on the remote control to enter the DVD status. Note: The unit do not allow enter DVD mode again after it have just left to avoid any damage of the DVD. Wait for 10 seconds to enter again. Basic playback When pressing the D.CALL button repeatedly different OSD indicator will be displayed for different types of disc DVD, CD etc Stop playback 1. Press STOP button to go to stop mode, the TV screen will show the start-up logo.
Advanced Playback Advanced Playback IMPORTANT NOTE: ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT. PROGRAM SUBTITLE Press " SUBTITLE ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. (the number of language depends on disc). This function can select up to 32 languages displayed on screen.
Special Function Playback JPEG DISC PLAYBACK Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file, then press the PLAY/ENTER button. Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen.
DVD System Setup DVD System Setup General Setup Process SETUP 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/or b item, then press submenu. to select, the to enter the or bu to select then 3.Press CH+/press PLAY/ENTER to confirm. 4.Press SETUP repeatedly to exit the set-up menus. PLAY/ENTER ..General Setup Page.. . Tv Display 4:3 LB 4 3/Ps . Angle Mark On 4 3/Lb Osd Lang ENG 16 9 Caption On Screen Saver Off ..Preference Page..
DVD System Setup(Continued) DVD System Setup General Setup Page ..General Setup Page.. Angle Mark: Users can select a particular camera angle .when playing a DVD which offers multiple angles. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off On Off This item allows you to set Angle Mark ON or OFF. ..General Setup Page.. On Screen Display (OSD) Language: Users can select on-screen display language. Caption: This function allows you to display or hide the caption.
DVD System Setup(Continued) DVD System Setup Preference Page The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. SETUP PLAY/ENTER TV Type: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems. Usually please set to MULTI. Parental: The parental control function works in conjunction with the different censorship classes assigned to DVDs.
DVD System Setup(Continued) DVD System Setup Default: Resets all settings SETUP PLAY/ENTER (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. ..Preference Page.. TV Type Parental Password Default Auto Reset Note: Some functions may not be available depending on the type of disc.
Playable Discs The following discs can be played: Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA. You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may not be very well or even not playable.
Dics Protection and DVD Characteristics Compare DVD disc with other discs: DVD Encode method LD Digital/MPEG Singleside doublelayer 9.4G Doubleside doublelayer 17G 133 242 266 Playing Time minutes minutes minutes 484 minutes Capacity Disc diameter Singleside singlelayer 4.7G Double -side single -layer 8.
Troubleshooting Guide To assist in location possible faults use help guide below. Troubleshooting No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input. Press TV/AV button to change signal input to TV input. Restart the television of power supply is interrupted. No sound Press MUTE button and verify if Mute mode is set.
Specifications Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Model L15T11W-A, L15T11W-C, Picture, sound system 1.5W+1.
Specifications Customer helpline:0845 604 0105
V0.