PM SERIES POWERED MIXERS: PM500 SYSTEM PM600 SYSTEM
WARNING: DUE TO THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Wharfedale Professional Limited Warranty: The PM Series of Powered Mixers are warranted to be clear of manufacturing or materials defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorised Wharfedale Professional dealer of distributor. Be aware that warranty details differ from country to country.
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS CONTENTS: PAGE 3: INTRODUCTION FEATURES PM500 AND PM600 GETTING STARTED WITH YOUR PM SYSTEM PAGE 4: FEATURES PT LOUDSPEAKERS PAGE 5: CHANNEL STRIP DESCRIPTION PAGE 6: DIGITAL DELAY SECTION MASTER CONTROL PAGE 7: TAPE IN AND RECORD OUT REAR PANEL PM500 PAGE 8: REAR PANEL PM600 PAGE 9: APPLICATIONS PAGE 10: DIMENSIONS PAGE 11: SPECIFICATIONS PM MIXER SECTION PAGE 12: SPECIFICATIONS PT LOUDSPEAKERS PM Series Instruction Manual Page 2
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS INTRODUCTION: Congratulations on the purchase of your PM System from Wharfedale Professional. The PM System is available in a choice of two versions - the PM 500 and the PM 600. The PM500 System comprises 1 x PM 500 powered mixer, two PT10 two way 10” loudspeakers and one DM1.0 dynamic microphone (plus one mic cable and two speaker cables).The PM600 System comprises 1 x PM600 powered mixer, two PT12 two way 12” loudspeakers and one DM1.
FEATURES OF THE PT LOUDSPEAKER SECTION OF YOUR SYSTEM: An integral part of the PM Systems are the PT loudspeakers. The PM500 comes with a pair of PT10 loudspeakers whilst the PM600 comes with a pair of PT12 loudspeakers. The PT series are high output, high efficiency loudspeakers featuring Wharfedale Pro proprietary drive unit and a purpose built high quality Electro-Dynamic high frequency driver. With built in high frequency driver overload protection, the PT series are perfect for life on the road.
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS CHANNEL STRIP DESCRIPTION PM500: 2 1 3 1. VOLUME: Determines volume level of the channel in the mix. 2. LOW EQ: The LOW EQ control gives 15db of boost or cut at 80Hz. By turning the knob to the right (boost) instruments such as guitars can be given more clarity, or vocals can be ‘warmed’. Turning to the left (cut) will eliminate unwanted low frequencies such as those caused by close miking or excessive bass frequencies in instruments 3.
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS MASTER SECTION DESCRIPTION PM500 AND PM600: DIGITAL DELAY SECTION: The built in digital delay will process the signal from the input channels and feed to the master output. The effects of digital delay are controlled by: TIME: This adjusts the internal time of the delays. Turn to the right to increase the interval time between two delays, turn to the left to decrease.
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS TAPE IN AND REC OUT PM500 AND PM600: The TAPE IN sockets allow cassette recorders or CD players to be added to the Main output. The RECORD OUTPUT provides a signal output to a cassette deck and home audio equipment. Sockets are RCA Phono. REAR PANEL DESCRIPTION PM500: 1 2 3 4 PM500: 1. MAIN LINE OUT: This unbalanced insertion point allows the main output to be sent to an external signal processor or power amplifier.
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS REAR PANEL DESCRIPTION PM600: 2 1 3 4 PM600: 1. MAIN LINE OUT: This unbalanced insertion point allows the main output to be sent to an external signal processor or power amplifier. The insert is a 1/4' phono jack socket which is normally bypassed. 2. SPEAKER OUTPUT JACKS: These outputs allow two speakers to be connected at the same time to the powered mixer. The total minimum load required is 4 Ohms.
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS APPLICATIONS: PM600 PT LOUDSPEAKERS Power Amplifier Graphic EQ MIC LEVEL VOCAL MIC GUITAR CD PLAYER AUDIO CASSETTE KEYBOARD PM Series Instruction Manual Page 9
WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS DIMENSIONS: PM600 475mm/18.7” including carpet box End view 188mm 7.4” 241mm 9.5” Front view PM600 RM 485mm/19” including rack mounts End view 145mm 5.7” Front view 228mm 8.9” PM500 475mm/18.7” including carpet box 155mm 6.1” End view 269mm 10.5” Front view PM500 RM 485mm/19” including rack mounts End view 112mm 4.4” Front view 248mm 9.
MODEL PM500 MIXER PM600 MIXER 120 WATTS 230 WATTS BALANCED MIC 4 5 LINE CHANNELS 5 6 POWER AMP - MAX OUTPUT IN WATTS 4 OHMS INPUTS INPUT IMPEDANCE LOW Z (BALANCED) 2K/OHMS 2K/OHMS LINE 16K/OHMS 16K/OHMS MAIN OUT UNBAL. TRS UNBAL.
MODEL NAME FREQ RESP +/- 6 dB SENSITIVITY 1W@1M NOMINAL COVERAGE HOZ NOMINAL COVERAGE VERT INPUT POWER (WATTS) CONTINUOUS MUSIC PEAK MAX SPL PEAK NOMINAL IMPEDANCE PRODUCT DIMS (MM) H W D SHAPE WEIGHT KG (NET) WEIGHT LBS (NET) L F DRIVER SIZE (MM/INS) PROTECT TYPE FINISH COLOUR GRILLE STAND ADAPTOR CONNECTORS IN (POWER INPUT FROM AMPLIFIER) PT-10 PT-12 65Hz-20KHz 95dB 90º 60º 50Hz-20KHz 97dB 90º 60º 110 220 440 119dB 8Ω 499 341 279 TRAP 11 KG 24.
WHARFEDALE PROFESSIONAL IAG HOUSE, SOVEREIGN COURT, ERMINE BUSINESS PARK HUNTINGDON, PE29 6XU, UNITED KINGDOM www.wharfedalepro.com 911.