User guide

SL824USB & SL1224USB Studio/Live Mixer
STEREO CHANNELS
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1. Balanced/Unbalanced TRS input for the left channel or mono line level
sources
2. Switches between USB and line level source
3. Balanced/Unbalanced TRS input for the right channel of stereo line
level sources
4. Gain control for calibrating sources and applying correct gain structure
5. High EQ centred at 12KHz
6. Mid EQ centred at 1KHz
7. Low EQ centred at 80Hz
8. Pre-fader auxiliary send for monitor mixes or effects
9. Switchable pre/post-fader auxiliary send for monitor mixes or effects
10. Pre/Post switching for Aux 2
11. Sends to the internal FX engine
12. Used to spatially place the channel within the stereo eld
13. (Pre Fade Listen) allows you to set the channel gain and monitor the
channel in isolation through the control room or headphone outputs
14. Indicates that PFL is engaged
15. Shows when clipping is occurring
16. Shows when signal is present
17. Sends the channel to the main mix bus
18. Sends the channel to the USB recording bus
19. Sets the amount of signal sent to the main or USB bus
SL824 & SL1224 user manual.indd 7 2010-12-16 15:19:38