User guide

OPERATING MANUAL AND USER GUIDE
7
FX AND AUX SECTION
1. Sends the FX output to the Auxiliary bus 1 so that FX
can be heard in monitor mixes
2. Sends the FX output to the Auxiliary bus 2 so that FX
can be heard in monitor mixes
3. Selects the effect algorithm as listed below the control
4. Shows when the FX bus is overloaded
5. Shows when the FX bus is receiving signal
6. Turns the FX processor on or off
7. Sends the output of the FX processor to the main mix
bus
8. Controls the overall level of the Aux 1 bus
9. Controls the overall level of the Aux 2 bus
10. Controls the overall level of the FX bus
11. Controls the level of the Aux Return input
1
3
2
4
5
7
8
9
10
11
6
FRONT PANEL INPUTS AND OUTPUTS
1. Used to connect the output of an external effect processor that is fed by an Aux bus. As it has
an independent level control it can be used as an additional line level utility input.
2. Aux send 1 & 2 outputs the signal sent to each respective bus. These can be used to feed
processors or monitors.
3. Used for control room monitoring, connect directly to your power amplier or active speakers
4. Connects to your computer for full duplex class-compliant recording and playback
5. For connecting headphones
1 2 3 4 5
SL824 & SL1224 user manual.indd 8 2010-12-16 15:19:39