PROFESSIONAL SOUND SYSTEMS Series OPERATING MANUAL AND USER GUIDE Titan™ 8 Passive Titan™ 12 Passive Titan™ 15 Passive Titan™ 8 Active Titan™ 12 Active Titan™ 15 Active Titan™ Sub A12 Titan™ Sub A15 www.wharfedalepro.
OPERATING MANUAL AND USER GUIDE IMPORTANT WARNINGS & SAFETY INSTRUCTIONS - GENERAL 1. READ ALL INSTRUCTIONS carefully and become familiar with the features and functions of these products before operating them. 2. RETAIN THESE INSTRUCTIONS for future reference. 3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to. 4.
TitanTM Series Wall Mounting Titan Speaker System WPB-1 Wall Mounting Bracket (Titan™ 12 / 15) WHARFEDALE PRO LIMITED WARRANTY Wharfedale Pro Titan™ Series speakers are warranted of manufacturing or material defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for information. *Be aware that warranty details may differ from country to country. Contact your dealers or distributor for information.
OPERATING MANUAL AND USER GUIDE TABLE OF CONTENTS 1……………………………..Important Warnings & Safety Instructions 2……………………………..Important Safety Information Powered Products 4……………………………..What about the Titan™ Series? 5……………………….…….Introduction/Overview 6……………………….…….Features 7……………………………..Setting up/ Speaker Placement 7……………….…………….Connections/ Wiring - Passive 8……………….…………….Rear Panel Layout - Passive 8……………….…………….Connection Diagram Passive 12……………….…………….Rear Panel Layout - Active 15…………..……………..….
TitanTM Series DIMENSIONS 12.28" 312mm 21.88" 556mm O MIX -- _ OPTIMIZER BR O ) (BALANCED) AA INPUT O (BALANCED) OUTPUT 15.11" 384mm 12.28" 312mm 7.1" 180mm 15.83” 402mm 27.87” 708mm 18.81” 478mm 15.
OPERATING MANUAL AND USER GUIDE TITAN™ SERIES OVERVIEW The Titan™ Series are powerful, accurate, high quality loudspeaker systems with low distortion that were designed to deliver high quality sound for the best value. From the Titan™ 8 (passive) to the Titan™ 15 Active models plus two powered subs, you have what it takes to assemble the system that your music deserves. An important factor in loudspeakers is the smoothness of the sound coverage.
TitanTM Series DIMENSIONS 8.7” 221mm 15.59" 396mm 2 10.47” 266mm 8.7” 221mm 12.28” 312mm 21.89” 556mm 2 15.11” 384mm 12.
OPERATING MANUAL AND USER GUIDE SETTING UP/ SPEAKER PLACEMENT The uniform dispersion of the Titan™ Series makes it easy to place the speakers where you need them, rather than trying to rearrange the room to accommodate the sound system. For the best coverage and highest quality sound, the speakers should be located above head level. Mounting hardware (M6/M8) and an integral tripod stand socket make installation easy and safe. The Titan™ Series accommodates a bottom mounted OmniMount® 60.
TitanTM Series SPECIFICATIONS - Titan™ ACTIVE (Con't) Titan™ 8 ACTIVE Titan™ 12 ACTIVE Titan™ 15 ACTIVE Switchable balanced mic or line Switchable balanced mic or line Switchable balanced mic or line level input level input level input Mic: -36dBu (-38.2dBv or Mic: -36dBu (-38.2dBv or Mic: -36dBu (-38.2dBv or 12.28mVrms) 12.28mVrms) 12.28mVrms) Inputs Input A – type Input Sensitivity Line: +4dBu (1.78dBv or 1.228Vrms) Line: +4dBu (1.78dBv or Line: +4dBu (1.78dBv or 1.228Vrms) 1.
OPERATING MANUAL AND USER GUIDE CONNECTION DIAGRAM # 2 Titan™ 8/12/15 MONO SYSTEM WITH TWO MONITORS CONNECTING MULTIPLE Titan™ 8/12/15 SPEAKERS TOGETHER IN A MONO-MAIN AND STAGE MONITOR CONFIGURATION USING A SINGLE, DUAL CHANNEL AMPLIFIER MAIN SPEAKERS STAGE MONITORS 4 OHM LOAD 4 OHM LOAD Left Right OUTPUT OF STEREO POWER AMPLIFIER OR POWERED MIXER NOTE 7KLV FRQ¿JXUDWLRQ UHSUHVHQWV D RKP ORDG WR HDFK RXWSXW FKDQQHO RI WKH DPSOL¿HU 9
TitanTM Series SPECIFICATIONS - Titan™ PASSIVE SERIES Titan™ 8 Titan™ 12 Titan™ 15 Loudspeaker Type: 8" 2-way 12" 2-way 15" 2-way Frequency Response (+/–3dB): 70 - 20kHz 55 - 20kHz 50 - 20kHz Sensitivity (1W@1M): 96dB 98dB 97dB Peak SPL: 124dB 128dB 129dB HF Coverage (H x V): Ý [ Ý Ý [ Ý Ý [ Ý System Impedance: 8 ohm 8 ohm 8 ohm Continuous: 150W 250W 400W Music: 300W 500 800W Peak: 600W 1000 1600W Size: 203mm/ 8" 305mm/ 12" 381mm/ 15" Coil Size: 38.
OPERATING MANUAL AND USER GUIDE CONNECTION DIAGRAM # 4 USING THE Titan™ 8/12/15 WITH A PASSIVE SUBWOOFER TITAN™ 8/12/15 INPUT AMPLIFIER OUTPUTS INPUT: +1 Positive -1 Negative OUTPUT A OUTPUT B PARALLEL INPUTS WWW.WHARFEDALEPRO.
TitanTM Series CONNECTION DIAGRAM # 1 TWO CHANNEL SYSTEM WITH HIGHPASS OUTPUT TO LEFT ACTIVE SPEAKER OR AMPLIFIER INPUT TO RIGHT ACTIVE SPEAKER OR AMPLIFIER INPUT INPUT OUTPUT (B A L A N C E D ) (B A L A N C E D ) 0 I I I I I I A I I I Left Output Right Output WWW.WHARFEDALEPRO.
OPERATING MANUAL AND USER GUIDE Titan™ 12/15 ACTIVE REAR PANEL LAYOUT HHDW Sink 2 HI / LOW EQ (HTXDOizDWion conWUoOs 4 VOLUME conWUoO A&B O O MA X 6 0 MA X +10dB -1 0 d B RCA INPUT L & R (LHIW DQG RiJhW HIG H MIC / LINE swiWch -1 0 d B G A IN POWER ON / OFF swiWch 5 ON ³BRO™” ciUcXiW swiWch 7 LO O P OUTPUT soXUFH LOOP / MIX swiWch 9 POWER connHcWoU 11 XLR OUTPUT connHcWoU 12 +10dB MI X XLR / ¼" combo jDcks IoU INPUT A&B A 13 3 LOW CD/TAPE 10 POWER ON LED inGicDWoU DQG
TitanTM Series Titan™ Sub-A12 CONNECTION DIAGRAM # 2 USING TWO Titan™ Sub-A12 WITH TWO POWER SPEAKERS 120Hz 150Hz 100Hz 180Hz 200Hz 80Hz 0 180 M A X LOW PASS FILTER L (B A L /U N B A L (B A L A N C E D R INPUT OUTPUT AC220 240V 50Hz 250W FUSE T3.15AL250V 120Hz 150Hz 100Hz 180Hz 200Hz 80Hz 0 180 M A X LOW PASS FILTER L (B A L /U N B A L (B A L A N C E D R INPUT OUTPUT AC220 240V 50Hz 250W FUSE T3.
OPERATING MANUAL AND USER GUIDE Titan™12A / 15A CONNECTION DIAGRAM # 1 Basic microphone / playback hookup MP3 Player 0 HI 0 0 ON - +6 VOLUME - MA X O FF LIM IT +6MA X -12dB -10dB VOLUME +12dB +10dB LOW POWER 0 L OFF HIGH ON B AS S RES PO N SE INPUT LOW -12dB -10dB +12dB +10dB R GAIN OPTIMIZER Place switch down in “MIX” position EQ AC INPUT CD/TAPE MI X LOO P AC Power Cord (BALANCED) A AC220-240V~60Hz AC220-240V~50Hz 400W FUSE T4AL 250V (BALANCED) B INPUT INPUT INP
TitanTM Series Titan™ Sub A12 Rear Panel Features 1. HEAT SINK - Cooling fins for amplifier. Do not obstruct. 2. VOLUME CONTROL - Adjusts the volume. 3. INPUT L - Balanced line level input via a XLR/ ¼” combo connector. 4. INPUT R - Balanced line level input via a XLR/ ¼” combo connector. 5. OUTPUT R - Balanced male XLR connector provides output HIGHPASS signal. 6. OUTPUT L - Balanced male XLR connector provides output HIGHPASS signal. 7.
OPERATING MANUAL AND USER GUIDE Titan™ Sub-A12 CONNECTION DIAGRAM # 1 TWO CHANNEL SYSTEM WITH HIGHAPASS OUTPUT 120 H z 150 H z 100 H z 180 H z 200 H z 80 H z 0 180 M AX LOW PASS FILTER L ( BAL/UNBA L ( BALANCE D R INPUT /HIW 2XWSXW 5LJKW 2XWSXW 17 OUTPUT AC220 240V 50Hz 250W FUSE T3.
TitanTM Series Titan™ 8/12/15 ACTIVE Rear Panel Features 1. Heat Sink: The heat sink allows for dissipation of heat built up from the amplifier via air cooling at the rear of the enclosure. 2. HI and LOW EQ (equalization) controls: These knobs control the equalization of the overall output signal providing +/- 10dB in each frequency range. 3. POWER ´ON´ indicator LED and LIMIT indicator LED: The bracketed LED to the left of the POWER switch illuminates when the power switch is in the´ON´ position.
OPERATING MANUAL AND USER GUIDE Titan™ Sub-A15 - REAR PANEL FEATURES 1. INPUT A - Balanced line level input via a XLR / ¼” combo connection. 2. OUTPUT A - Balanced male XLR connection provides output “THRU” or HIGHPASS signal (depending on switch setting). 3. SPEAKER LEVEL INPUT - Allows for connection of the output of an external amplifier to use the Titan™ Sub-A15 as a passivesubwoofer. NOTE: Disconnect the power cord when using the Titan™ Sub-A15 in this mode. 4.
TitanTM Series Titan™ 8 / Titan™ 12 / Titan™ 15 ACTIVE Connecting the Titan™ Active Series to your system is just as easy, with a couple more things to do. Plug in the electrical cable and your audio cables and switch the unit on. Always be sure there is a good electrical ground. The Titan™ Series rear panel has one combo XLR / TRS Jack input. Be sure to use high quality shielded cable and high quality connectors. The volume control is conveniently located above the input sensitivity switch (mic/line).
OPERATING MANUAL AND USER GUIDE CONNECTION DIAGRAM # 2 USING TWO Titan™ Sub-A15's WITH TWO POWERED SPEAKERS TO LEFT MAIN POWERED SPEAKER INPUT OUTPUT (B A L AN C E D ) (B A L AN C E D ) 0 I I I I FROM MIXER OUTPUT LEFT I I A I I I WWW.WHARFEDALEPRO.
TitanTM Series CONNECTION DIAGRAM # 3 Titan™ 8/12/15 MONO MAIN SYSTEM WITH TWO MONITORS (another view) MAIN SPEAKER #1 PARALLEL CONNECTION TO SECOND MAIN SPEAKER INPUT: +1 Positive -1 Negative MAIN SPEAKER #2 INPUT: +1 Positive -1 Negative OR PARALLEL INPUTS PARALLEL INPUTS WWW.WHARFEDALEPRO.COM WWW.WHARFEDALEPRO.COM (CHANNEL 1) FROM MIXER MAIN OUT TWO CHANNEL AMPLIFIER OUTPUTS FROM MIXER MONI TOR OU T MODEL S-SERIES Professional Power Amplifier = NL4 Connection WWW.WHARFEDALEPRO.
OPERATING MANUAL AND USER GUIDE SPECIFICATIONS - Titan™ ACTIVE SERIES Titan™ 8 ACTIVE Titan™ 12 ACTIVE Titan™ 15 ACTIVE System Type Active 8” 2-way Bi-Amplified Active 12” 2-way Bi-Amplified Active 15” 2-way Bi-Amplified Frequency Response (+/-3dB) 70-20kHz 55-20kHz 50-20kHz Low Frequency Driver (mm/in.) 205mm / 8” 305mm / 12” 381mm / 15” High Frequency Driver Compression Driver Titanium Compression Driver Titanium Compression Driver Exit Size (mm / inches) 30mm / 1.
TitanTM Series TM Titan™ REAR PANEL LAYOUT INPUT: +1 Positive -1 Negative INPUT: +1 Positive -1Negative PARALLELINPUTS : POWER HANDLING POWER HANDLING: 150 W atts C ontinuous 300 W atts Program 500 W atts Peak Im pedance: 8 O hm s 200 Watts Continuous 500 Watts Program 1000 Watts Peak Impedance: 8 Ohms WWW.WHARFEDALEPRO.COM WWW.WHARFEDALEPRO.
OPERATING MANUAL AND USER GUIDE SPECIFICATIONS - Titan™ SUB SERIES TITAN™ Sub-A15 Titan™ Sub-A12 System Type Band-pass subwoofer Reflex subwoofer Frequency Response (+/-3dB) 45-150Hz 55-200Hz Enclosure Material 18mm Plywood 15mm MDF Enclosure Colour Grey or Black Grey or Black Frame material Die-cast aluminium frame steel frame Size (mm / inches) 404mm / 15” 305mm / 12” Coil Size (mm / inches) 75 / 3” 64.26mm / 2.
TitanTM Series FEATURES ʍ 2-way reflex systems ʍ Passive (3) and Active (3) + Powered Subs (2) ʍ Low distortion, high power woofers ʍ 25.
OPERATING MANUAL AND USER GUIDE DIMENSIONS 15.83” 402mm 27.87” 708mm 2 18.81” 478mm 15.83” 402mm 8.7” 221mm 15.59" 396mm 2 10.47” 266mm 8.
TitanTM Series WHAT ABOUT THE Titan™ SERIES? Wharfedale Pro Titan™ Series of passive and self-powered foreground/back-ground music and sound reinforcement speakers are designed for demanding professional applications such as reproduction and reinforcement of music and sound in venues as diverse as live performance venues, airports, houses of worship, A/V presentations, schools, retail shops, restaurants and public houses.
OPERATING MANUAL AND USER GUIDE DIMENSIONS 493.0 431.0 Titan SUB A12 TOP VIEW 360.0 360.0 463.0 120Hz 150Hz 100Hz 180Hz 200Hz 80Hz 0 180 MAX LOW PASS FILTER L (BAL/UNBAL) (BALANCED) INPUT OUTPUT R AC 22 0 240V 50Hz 250W FUSE T3.15 AL 250V 431.0 SIDE VIEW FRONT VIEW Titan REAR VIEW SUB A15 TOP VIEW INPUT (BALANCED) OUTPUT (BALANCED) I 0 I I I I I A I I I WWW.WHARFEDALEPRO.
TitanTM Series IMPORTANT SAFETY INFORMATION POWERED PRODUCTS Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been exposed to rain or moisture, does not operate normally, or has been dropped.
Wharfedale Professional IAG HOUSE Sovereign Court, Ermine Business Park Huntingdon, Cambs, PE29 6XU, England www.wharfedalepro.com Wharfedale Professional reserves the right to alter or improve specifications without notice All rights reserved © 2008 Wharfedale Pro. Wharfedale Pro is a member of the International Audio Group (IAG).
ᥦ⠜ᮍᓣ ᇕᑩ 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 ᇕ䴶 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29