Manual
4. OPERATION & MAINTENANCE WHEATHEART - GRAIN AUGERS
4.4. MAINTENANCE UTILITY
24 30644 R1
GENERAL MAINTENANCE PROCEDURES
Important: Use only genuine Wheatheart replacement parts or equivalent. Replacement
parts such as intake guards, pulley guards, winches and lift cables must meet
ASAE standards or serious injury may result. Use of unauthorized parts will void
warranty. If in doubt, contact Westfield or your Westfield dealer. Do not modify
any auger components.
Area Maintenance Frequency
General
While auger is in use, observe the operation checklist
on 4.1.
Daily
General
If for any reason a part becomes damaged, replace it
immediately. If possible, lower auger to replace parts.
Regularly
Drive Belt
Check and replace if frayed or damaged.
Ensure tension is correct under load (correct tension is
the lowest at which the belts will not slip under peak
load conditions)
Frequently
Auger Supports Inspect. Frequently
Intake Bushing Lubricate. Daily
Truss Cables
If truss cables are used, adjust to keep tube
reasonable straight.
As needed
Motor Cover Protect motor from weather by covering.
During off sea-
son or when not
in use