User Manual

3. ASSEMBLY WHEATHEART - HYDROSTATIC BIN SWEEP
3.2. HYDRAULIC PUMP KIT INSTALLATION (PORTABLE MODEL)STANDARD, PORTABLE, TRUCK MOUNT, & SUPER SWEEP
18 IM1 R3
Note: Hose (12) runs from the “OUT” port on the valve to the pressure (P) side of the
relief valve; hose (13) runs from the relief valve to the pump; hose (14) runs to
return side (T) of the relief valve; and hose (15) runs from the relief valve to the
tank.
INSTALLATION WITH MOVER KIT
Figure 3.8 to Figure 3.10 illustrate the hose assembly process when a mover kit
has already been installed.
Note: The 24” hose goes from the spool valve to the control valve pressure side (P).
Then, the existing line hooks up to the return line.
Figure 3.8