IN-BIN SUPER SWEEP ALL MODELS ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual for future reference.
This product has been designed and constructed according to general engineering standardsa. Other local regulations may apply and must be followed by the operator. We strongly recommend that all personnel associated with this equipment be trained in the correct operational and safety procedures required for this product. Periodic reviews of this manual with all employees should be standard practice. For your convenience, we include this sign-off sheet so you can record your periodic reviews.
WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS TABLE OF CONTENTS 1. Assembly .............................................................................................................................. 1.1. Hydraulic Hose Installation....................................................................................... 1.2. Relief Valve Installation ............................................................................................ 1.3. Assembly......................................................
WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS 4 IM5-R1
WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS 1. ASSEMBLY 1.1. HYDRAULIC HOSE INSTALLATION 1. Assembly Warning: Before continuing, please reread the safety information relevant to this section at the beginning of this manual. Failure to follow the safety instructions can result in serious injury, death, or property damage. The In-Bin Sweep kit consists of (see Figure 1.1): 1. 2. 3. 4. 5. 6. 7. 8. 9.
1. ASSEMBLY 1.2. RELIEF VALVE INSTALLATION WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS Figure 1.2 Schematic Drawing Figure 1.3 Relief Valve 1.2. RELIEF VALVE INSTALLATION 1. The “P” on the relief valve must be connected to the “out” side of the pump (see Figure 1.2 and 1.3) or directly to the “Pressure” source if using a remote hydraulic source. 2. The “T” return or “tank” must be connected to the tank or reservoir of the Bin Sweep.
WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS 1. ASSEMBLY 1.3. ASSEMBLY 1.3. ASSEMBLY 1. Mount tower over opening in floor and in the center of the bin. 2. Remove hairpin and slide pivot assembly down pivot shaft until it rests on the collar. Mount motor to pivot assembly with 3/8” bolts. 3. Attach special motor coupler to hydraulic motor and then a straight bin sweep section pinning in place. Add on extra straight sections as needed with the last long section having the walking shoe.
1. ASSEMBLY 1.4. WHEEL MOVE OPTION Note: WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS Figure 1.5 Flighting and Backboard Assembly 5. Adjust collar until pivot assembly holds the first sweep section of flighting about 1/8” off the floor (this is level). 6. The pivot assembly can be adjusted up to 10” horizontally in four different positions by means of the two welded pegs and the welded cross pipes, which can be swiveled 180°.
WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS 1. ASSEMBLY 1.4. WHEEL MOVE OPTION Figure 1.
1. ASSEMBLY 1.4.
WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS 2. OPERATION 2. Operation Warning: Before continuing, please reread the safety information relevant to this section at the beginning of this manual. Failure to follow the safety instructions can result in serious injury, death, or property damage.
2.
WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS 3. APPENDIX 3. Appendix Figure 3.
3. APPENDIX WHEATHEART - IN-BIN SUPER SWEEP ALL MODELS Parts List No.
WARRANTY REGISTRATION Wheatheart congratulates you on your new equipment purchase. The warranty registration form must be filled out within thirty (30) days from delivery date and sent to: Wheatheart Manufacturing 3455 Idylwyld Dr. N., Saskatoon, Saskatchewan S7L 6B5 CUSTOMER COPY (Retain this card for warranty and record purposes.
LIMITED WARRANTY Wheatheart warrants to the buyer that the new machinery is free from defects in material and workmanship. This warranty is only effective for any new machinery that has not been altered, changed, repaired, or treated since its delivery to the buyer, other than by Wheatheart or its authorized dealers or employees, and does not apply to accessories, attachments, tools, or parts sold or operated with the new machinery if they have not been manufactured by Wheatheart.
Wheatheart Part of the Ag Growth International Inc. Group 3455 Idylwyld Drive North Saskatoon, Saskatchewan, Canada Phone: (306) 934-0611 Fax: (306) 934-6020 Toll Free: (877) 934-0649 (Canada & USA) website: www.wheatheart.com email: sales@wheatheart.com © Ag Growth International Inc.
