Owner's manual

5. OPERATION WHEATHEART - PORTABLE DRIVE OVER PIT
5.3. OPERATING PROCEDURE 10" & 13"
30 30686 R0
3. Raise the transport wheels so that access can be gained to the underside of
the machine/chock wheels.
4. Install transport lock pins or block the machine from falling.
5. Disable and lock out all power sources (hydraulic or electric).
6. Remove drive-over plates, center hopper guard, and side hopper guard.
Refer to Figure 5.7.
Figure 5.7 Cleanout
7. Place a container, such as a 5 gal pail, under the cleanout door.
8. Remove the cleanout door located underneath the bottom of the transfer
auger.
9. Clean grain from around augers and hoppers.
10. To wash pit, slope unit towards hitch. Dry the Pit sufficiently to prevent
rusting.
11. Replace parts removed in step 6.