REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS ASSEMBLY AND OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual for future reference.
This product has been designed and constructed according to general engineering standardsa. Other local regulations may apply and must be followed by the operator. We strongly recommend that all personnel associated with this equipment be trained in the correct operational and safety procedures required for this product. Periodic reviews of this manual with all employees should be standard practice. For your convenience, we include this sign-off sheet so you can record your periodic reviews.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS TABLE OF CONTENTS 1. Safety First............................................................................................................................ 5 1.1. General Safety ......................................................................................................... 6 2. Assembly .............................................................................................................................. 9 2.1.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 4 30664 R0
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 1. SAFETY FIRST 1. Safety First The Safety Alert symbol to the left identifies important safety messages on the product and in the manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety messages. Why is SAFETY important to you? Three big reasons: • Accidents disable and kill. • Accidents cost. • Accidents can be avoided.
1. SAFETY FIRST 1.1. GENERAL SAFETY WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 1.1. GENERAL SAFETY Important: The general safety section includes instructions that apply to all safety practices. Any instructions specific to a certain safety practice (e.g., assembly safety), can be found in the appropriate section. Always read the complete instructional sections and not just these safety summaries before doing anything with the equipment.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 1. SAFETY FIRST 1.1.
1. SAFETY FIRST 1.1.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 2. ASSEMBLY 2.1. REMOTE MOUNT INSTALLATION 2. Assembly The manual for the Hydraulic Powerswing is included with this kit and installing the Remote Powerswing will follow all the same steps with a few additional steps that must be completed first. Be sure to read this insert over PRIOR to assembly to insure correct assembly order.
2. ASSEMBLY 2.2. HYDRAULIC CONFIGURATION WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 2.2. HYDRAULIC CONFIGURATION This valve is designed to be used with tractors / hydraulic pumps that operate in open loop format or with CLLS (Closed Loop Load Sensing) with simple modifications. If you are unsure of your hydraulic configuration it is recommended you contact your tractor dealer to inquire.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 2. ASSEMBLY 2.3. ANTENNA PREPARATION 2.3. ANTENNA PREPARATION When shipped, the antenna for the Remote Powerswing receiver will be within its protective steel housing. The antenna must be positioned outside of the housing (Figure 2.2) in order to get proper reception. Follow the steps below to adjust. Note: 1. Use two 7/16" wrenches to unbolt the two 1/4" bolts holding the protective receiver box onto the mount plate (see Figure 2.
2. ASSEMBLY 2.3. ANTENNA PREPARATION WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS Table 2.1 ITEM PART NO. DESCRIPTION ITEM PART NO.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 3. OPERATION 3. Operation The hand held transmitter has 8 buttons on it but only 2 are needed. To operate the swing, press the green "on" button in rows 1 and 2. These will be the only buttons that will move the swing. Note: If desired, the direction of movement when pressing each button can be reversed by reversing the connection of the two hoses to the tractor.
3.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 4. MAINTENANCE 4. Maintenance The Remote Powerswing can be exposed to some poor conditions during normal usage. Following the annual maintenance schedule of the electronic components below will assure a long life of operation. Note: 30664 R0 1. Open the junction box and check for corrosion and assure all connections are tight (see Figure 5.1). 2. Use an air gun to blow any dust and dirt out of the box. 3.
4.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 5. TROUBLESHOOTING 5. Troubleshooting Problem Hand held transmitter does not work. Manual switch does not work. Valve only works in one direction. Manual switch and transmitter do not work in either direction. 30664 R0 Possible Cause Remedy Verify that coding is correct (see Section 6. Appendix on page 19). Contact a Westfield customer serError with coding the transmitter or receiver. vice representative if problem persists.
5. TROUBLESHOOTING WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS Figure 5.
WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS 6. APPENDIX 6.1. REMOTE CODING 6. Appendix 6.1. REMOTE CODING For the remote to function correctly the receiver and transmitter must use the same code. The code on both the transmitter and receiver can be changed independently. The transmitter and receiver come from the factory pre-coded, but while assembling, the coding of both the transmitter and the receiver should be checked.
6. APPENDIX 6.1. REMOTE CODING WHEATHEART - REMOTE POWERSWING A232, A233, A234, A235, AND A236 MODELS Table 6.1 Switch Name A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 Switch Cross-Reference Receiver Transmitter Record Your Switch Switch Receiver Coding — 10 OFF — 9 OFF 1 8 2 7 3 6 4 5 5 4 6 3 7 2 8 1 Figure 6.
LIMITED WARRANTY Wheatheart warrants to the buyer that the new machinery is free from defects in material and workmanship. This warranty is only effective for any new machinery that has not been altered, changed, repaired, or treated since its delivery to the buyer, other than by Wheatheart or its authorized dealers or employees, and does not apply to accessories, attachments, tools, or parts sold or operated with the new machinery if they have not been manufactured by Wheatheart.
Wheatheart Part of the Ag Growth International Inc. Group P.O. Box 151 902 South St. Road 32 Union City, Indiana Phone: 1-800-354-9502 or 1-765-964-4631 Fax: (765) 964-3529 Toll Free: (877) 934-0649 (Canada & USA) website: www.wheatheart.com email: sales@wheatheart.com © Ag Growth International Inc.
