Manual

3. ASSEMBLY WHEATHEART - SELF-PROPELLED AUGER KIT
3.3. OIL RESERVOIR ASSEMBLY WHEATHEART BH & R SERIES
16 30761 R0
Figure 3.1 Gear Pump Installation Guard
3.3. OIL RESERVOIR ASSEMBLY
1. Bolt the double tank mount brackets to the frame with 3/8” x 2-5/8” u-bolts 
3/8” washers and 3/8” nylock nuts (Figure 3.2).
2. Secure the 22L oil reservoir to the tank mount brackets using the 32” clamps
provided. The optional 43 L oil reservoir is attached to the double tank mount
brackets using two 25” gear clamps joined together.
• Take care not to crush the oil reservoir when tightening hose clamps.
• The reservoir must be mounted so that the oil level remains above the
gear pump (use general purpose ISO 32 oil).
• To reduce weight at the intake end, mount the tank as close as possible to
the axle of the auger.