Technical data

SP40S Multi-Function Facility Communication System Manual, Revision L

1 Foreword

1.1 Intended Use

This manual is designed to serve the installers and operators of the SP40S Multi-Function Facility

Communication System. All operating instructions, product illustrations, troubleshooting/error

messages, and other relevant information are contained in this manual. It is the user’s

responsibility to ensure that all instructions in this manual are applied strictly.

1.2 Design Change Disclaimer

Due to design changes and product improvements, information in this manual is subject to change

without notice. Cooper Notification reserves the right to change product design, including

illustrations and diagrams, at any time without notice to anyone, which may subsequently affect

the contents of this manual.

Cooper Notification assumes no responsibility for any errors that may appear in this manual.

Cooper Notification will make every reasonable effort to ensure that this manual is up to date and

corresponds with the shipped Cooper Notification SP40S Multi-Function Facility Communication

System.

1.3 User Operation Assistance

Should you experience any difficulty in installing or operating your SP40S Multi-Function

Facility Communication System, please contact your Cooper Notification representative. The

Troubleshooting chapter in this manual (Chapter 8) includes a list of common system problems,

possible causes, and corrective operator actions. The information given here is general. Feel free

to contact the Technical Support department of Cooper Notification at 1-800-631-2148. Hours are

8:00 a.m. - 7:00 p.m. (Eastern Time), Monday through Thursday and 8:00 a.m. –

5:00 p.m. (Eastern Time) on Friday.

1.4 Product Model Descriptions

SP40S – Baseline product as described in this manual

SP40SE – 240V version of SP40S

SP40S-D – SP40S panel with expanded capability to meet UFC requirements – 10 minute NAC

circuit timeout.

SP40SE-D – SP40SE panel with expanded capability to meet UFC requirements – 10 minute

NAC circuit timeout.