Dimension Guide

Electric Dryer
PRODUCT MODEL NUMBERS
W10617663D
02/2016
WED4890B, WED4995E, WED4985E
29" Wide Models – Wide opening side-swing door
Minimum Required Spacing
*Additional spacing recommended
22
3
/4"
(578 mm)
27
3
/4"*
(705 mm)
26"**
(660 mm)
29"
(737 mm)
1
1
/2"
(38 mm)
41
1
/2"
(1054 mm)
27
3
/4"*
(705 mm)
29"
(737 mm)
41
1
/2"
(1054 mm)
13
3
/4"
(349 mm)
1
/2"
(13 mm)
26"**
(660 mm)
29" Wide Models – Wide opening hamper door
*6.5 or 7.0 cu. ft. capacity models
** 6.0 cu. ft. capacity models
3"/3"
(76 mm/76 mm)
3"/3"
(76 mm/76 mm)
24 in.
2
/24 in.
2
(155 cm
2
/
155 cm
2
)
48 in.
2
/48 in.
2
(310 cm
2
/
310 cm
2
)
18"/18"
(457 mm/
457 mm)
1"/1"
(25 mm/
25 mm)
1"/0"
(25 mm/0 mm)
5
1
/2"/0"
(140 mm/0 mm)
14" max.
(356 mm)
NOTES:
■ Most installations require a minimum 5½" (140 mm) clearance
behind the dryer for the exhaust vent with elbow. See “Venting
Requirements.”
■ Leveling legs should be 1/2" (13 mm) (to match height of
3.6 cu. ft. capacity washer) or 1½" (38 mm) (to match height of 3.8 cu. ft. capacity washer).
Minimum spacing for recessed area or closet
installation
The dimensions shown following are for the minimum
spacing allowed:
■ Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door,
and oor moldings.
■ Additional spacing of 1" (25 mm) on all sides of the dryer
is recommended to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings
are acceptable.
■ Companion appliance spacing should also be
considered.