Internet Connectivity Guide

3
Connectivity Setup
Get the app, alternate connectivity setup instructions, terms of use,
and privacy policy at www.whirlpool.com/connect. In Canada, visit
www.whirlpool.ca/en_CA/ and click on the Whirlpool
®
Connected Appliances link.
Connectivity requires Wi-Fi and account creation. App features and functionality subject to change. Data rates may apply.
If you have any problems or questions, call Whirlpool Corporation Connected Appliances at 1-866-333-4591.
IMPORTANT: Proper installation of your dishwasher prior to use is your responsibility. Be sure to read and follow the Installation
Instructions that came with your dishwasher.
Setup Instructions – App Assisted
You Will Need:
■ A home wireless router supporting Wi-Fi, 2.4Ghz preferably
with WPA2 security. If you are unsure if your wireless
router is WPA2 capable, refer to your router manufacturer’s
instructions.
■ The 10-character SAID from your dishwasher. The SAID,
MAC address, and a QR code are printed on a label on the
dishwasher. Refer to the dishwasher User Guide for the
location of the label.
■ The name of your electric utility company.
STEP 1
If This is Your First Smart Appliance:
You will need to download the Whirlpool
®
app and create an
online user account. You can download the app on Google
Play™
†
or the Apple
®
App Store
®‡
.
STEP 2
Download App and Account Setup
If you already have the app and a user account, skip ahead
to Step 3.
Create a User Account
Once installed, tap the Whirlpool
®
app icon to run
the app. You will be guided through the steps to set
up a user account. The app will make sure to get
the necessary personal and home information as
well as information about your energy company.
† Google Play is a trademark of Google, Inc.
‡ Apple and App Store are trademarks of Apple Inc.
For additional information, terms of use, and privacy policy, go to
www.whirlpool.com/connect. In Canada, visit www.whirlpool.
ca/en_CA and click on the Whirlpool
®
Connected Appliances link.
NOTE: The router should be on and have a live Internet
connection.
STEP 3
Register the Dishwasher in Your User Account
Select ADD APPLIANCE on the app to begin the process of
selecting your dishwasher, connecting it to your home network,
and registering it to your user account.
Follow the instructions in the app to connect your dishwasher.
If the app assisted setup is not successful, follow the “Alternate
Setup Instructions” section at www.whirlpool.com/connect to
connect your dishwasher to your wireless home network.
In Canada, visit www.whirlpool.ca/en_CA and click on the
Whirlpool
®
Connected Appliances link.
Dishwasher Use – Smart Operation
NOTE: You must have successfully completed the “Connectivity Setup” section for the following features to function. Verify that the
Wireless Status icon and either the Amber House icon or Blue House icon are illuminated. Check the Whirlpool
®
app for additional
dishwasher features, including Remote Enable (B).
u
q
u
q
u
q
u
q
Wireless icon Remote Enable icon Amber House icon
(peak electric rate)
Blue House icon
(normal electric rates)
Set a Remote Enable
Remote Enable requires Wi-Fi and account creation. App features
and functionality subject to change. Subject to Terms of Service
are available at: www.whirlpool.com/connect. Data rates may
apply. In Canada, visit www.whirlpool.ca/en_CA and click on the
Whirlpool
®
Connected Appliances link.
u
q
Remote Enable
Remote Enable mode allows you to start your dishwasher
remotely from the Whirlpool
®
app.
After loading the dishwasher and selecting your cycle settings,
touch and hold DOWNLOAD & GO for 3 seconds. The Remote
Enable icon will be solidly lit.
When a remote start command is received from the app, the
dishwasher will start the cycle. The Remote Enable icon will
remain lit.
NOTE: If no Wi-Fi connection is available, the Remote Enable
will not be set and the Wireless icon will blink for 2 seconds,
then go out.
HELPFUL TIP: Make sure that your dishwasher door remains
closed and the cycle is not changed until you start the cycle.
Opening the door after a Remote Enable has been set will
cancel the Remote Enable. The Remote Enable will need to
be reinitiated.
SET UP