Specifications

Thick wall construction (brick)

A. Second and third slots

2. Insert carriage bolt up through slot on tray-frame side and

support leg.

3. Place one end of tray center over carriage bolt.

4. Then place flat washer, lock washer and hex nut.

NOTE: Do not tighten. The leg must be able to move freely to

adjust angle when installed.

...... ,y,C

.....iiiiiiii.........

A. Hex nut D. Tray center

B. Lock washer E. Carriage bolt

C. Flat washer

Insert second carriage bolt through tray side and attach other

end of support leg.

NOTE: Do not tighten. The leg must be able to move freely to

adjust angle when installed.

,, c

A. Hex nut C. Flat washer

B. Lock washer D. Carriage bolt

6. Install support leg on other side.

Install SMART-MOUNT ° Tray Assembly in window

1. From inside, place SMART-MOUNT TM tray, support legs facing

down, in the window. Match the holes in tray side with the

predrilled holes in windowsill.

Using 2 - #10 - 12 x 11/2"slot-head wood screws, secure the

tray frame to the window.

A. #10 - 12x 1_" slot-head wood screws

NOTE: If the exterior of building can be damaged by support

legs, place a board between the wall and support legs.