Instruction for Use

14
• Warning: Do not connect to the power
supply before you have finished
connecting the oven and cooktop.
• Make sure the oven is installed and
connected to the electricity supply by a
qualified technician in accordance with
the manufacturer’s instructions and in
compliance with local regulations.
• The installer is responsible for the correct
electrical connection of the oven and the
observance of the relative safety
prescriptions.
• The oven must be connected to the
electricity supply by means of an all-pole
disconnect switch with minimum contact
gap of 3 mm.
Interconnecting cooktop and oven
•
Make sure that the voltage shown on the
rating plate is the same as the power supply
voltage in your home. The rating plate is on
the front edge of the oven cavity (visible with
oven door open).
•
Use a type H05RR-F power cord (minimum
length 800 mm):
• The appliances must be earthed by law.
• Do not use multiple plug adapters or
extension leads.
• After the oven has been installed, the
electrical components must be
inaccessible.
ELECTRICAL CONNECTION
Conductors X number Connection
1N+
~
H05 RR-F 3x4 mm²
2N+
~
H05 RR-F 4x2,5 mm²
3 +
~
H05 RR-F 4x2,5 mm²
3N+
~
H05 RR-F 5x1,5 mm²