Installation Guide

8
Adjust the Doors
Your refrigerator has two adjustable rollers - one on the right and
one on the left. If your refrigerator seems unsteady or you want
the doors to close easier, adjust the refrigerator's tilt using the
instructions below.
1. Turn the leveling leg to lower or raise that side of the
refrigerator. It may take several turns to adjust the tilt of the
refrigerator.
■ To raise, turn the leveling leg to the left.
■ To lower, turn the leveling leg to the right.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling legs and rollers
which makes it easier to adjust.
2. Open both doors again to make sure they close as easily as
you like. If not, tilt the refrigerator slightly more to the rear by
turning both leveling legs to the left; it may take several more
turns.
NOTE: To keep the refrigerator level, you should turn both
leveling legs the same amount.
3. Using a level, be sure that the refrigerator is still level side to
side. Readjust if necessary.
Door Removal &
Replacement
Top Hinge
A.
5
/ 16 " Hex-Head Hinge Screws
B. Top Hinge
A
B
A. Spacer
Bottom Hinge
Center Hinge
B. Bottom Hinge
C.
5
/ 16 " Hex-Head Hinge Screws
B. Center Hinge
C.
5
/ 16 " Hex-Head Hinge Screws
A. Spacer
D. Spacer
A
B
C
D
A
B
C
Door Swing Reversal (optional)
A. Door Hinge Hole Plug
A. Cabinet Hinge Hole Plugs
A. Door Stop Screw
B. Door Stop
3
2
1
A
A
BA
A.
5
/ 16 " Hex-Head Hinge Screws,
Dome Caps and Dome Cap Washers
4
A
Side View
Front View