Instruction Manual

10
Level Range
1. Place a standard flat rack in oven.
2. Place level on the rack and check levelness of the range, first
side to side; then front to back.
3. If range is not level, pull range forward until rear leveling leg is
removed from the anti-tip bracket.
4. Use a ³⁄₈" drive ratchet and slip-joint pliers to adjust leveling
legs up or down until the range is level.
5. Push range back into position.
6. Check that rear leveling leg is engaged in the anti-tip bracket.
NOTE: Range must be level for satisfactory baking
performance.
Installing/Replacing the Battery
*NOTE: Metal battery top is included in the bag containing the
literature.
To install or replace the 9V DC alkaline battery, follow the steps
below.
1. Open the broiler door.
2. Remove broiler pan and grill from broiler.
3. Using a Phillips screwdriver, remove the metal battery top
from the bottom of the range and open the plastic battery
box.
A. Battery holder location
A
A. Screw
B. Metal battery top*
C. Plastic battery box
D. Battery holder
B
A
C
D