Manual

OPERATING YOUR ÒRVER
Stopping/restarting your dryer
You can stop your dryer anytime during a
cycle.
To stop the dryer, either:
• Open the dryer door
' Turn the Cycle Control Knob to Off.
----- 1 NOTE: The Cycle Control
Knob should point to an Off
area when the dryer is not
^in use.
To restart the dryer:
1. Close the dryer door.
2. Select a new cycle, if desired.
3. Push the Start Button.
Selecting a cycle and setting
Your dryer’s Cycle Control Knob is shown
on the next page. Use the drying guidelines
and cycle descriptions on the following
pages for help in selecting the right
drying cycles.
Drying Guidelines
• Always follow care label directions when
they are available.
• To dry delicate fabrics, rubber, plastic, and
heat-sensitive fabrics, always use the Fluff
Air cycle or dry these items on a line or
rack.
• The last few minutes of all cycles are
without heat to make the load easier to
handle.
' To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
' Overdrying can cause shrinkage, static
cling, and damage to some fabrics.
' Refer to pages 19-27 for information about:
- sorting clothes for drying
- choosing load sizes
- using dryer fabric softeners
- drying special-care items
15