PARTS & SERVICE Manual AUTO SPARKLE SAP MODEL NO 3775 DESCRIPTION AUTOSPARKLE-110V,APWH.W.
CONTENTS S No DESCRIPTION PAGE No 1 SPECIFICATIONS 3 2. AUTOSPRAKLE FEATURES 6 3. CONTROL & FUNCTIONS 6 4. WIRING DIAGRAM 10 5. PROGRAM TIMING 12 6. EXPLODED VIEWS 15 7. PARTS LIST 18 8. FAULT FINDING-GUIDE 20 This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
Specifications 1 .Model Description AUTOSPARKLE 2. Machine Type Top Loading fully Automatic Agitator wash 3. Capacity 5 Kg. 4. M/c Wt. 38 Kg. 5. M/c Dimension 570 mm (W) x 590 mm (B) x 1000 mm (H) 6. Cabinet Finish Pre painted Steel 7. No of programs 19 8. Program Select 4 LED’s - Normal, Speed, Heavy & delicate (Heavy double rinse) 9. Start/Pause Provided 10. Error Signal (Audio) Available I 1. Wash Action Normal, Speedy, 12. Spin Speed 740 RPM (Max.) 13.
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
AUTOSPARKLE - FEATURES : ? ? ? ? ? ? Spin Basket - P.P. Material Easy spin basket removal is possible Hose less bleach inlet system Single Pressure switch hose. LID switch control for Agitate/Spin operations. (8 Bit controller) Tub ring mounting with out screws A LOOK AT THE CONTROL PANEL... The following are the knobs/switches available at the panel 1 Power ON/OFF Switch 2. Water level selector 3. Course Select 4. Program Select 5.
This switch is basically a ON/OFF switch controlling the supply to the machine, by pressing this switch, the machine is turned ON. To Switch off the machine, press the switch again. Machine operation stops automatically at the end of the cycle and this switch will still remain in ON position Similar To ALPHA model and the user has to switch it OFF before removing the clothes from the spin basket.
COURSE SELECT This feature enables the user to select the various combination of SOAK, WASH, RINSE and SPIN. The Selection is effected by pressing this Course Select button and indicated by the glowing of the corresponding LED indicator in the panel. The default setting is WASH, RINSE and SPIN i.e. whenever the Power Switch is switched ON, these 3 processes will be selected by default and the corresponding LED lamps will glow.
The timing sequences of this individual cycle are enclosed for your ready reference. OPERATING INSTRUCTIONS: 1. Add detergent and load the clothes as usual. 2. Connect the Fill Hose and Power cord to the appropriate points. 3. Place the Drain Hose on the ground. 4. Switch on the machine. Set the Water level and Water inlet Selector (as applicable) to the desired settings. 5. Select the appropriate Course and Program. 6. Press the Start button to commence the operation. 7.
soaking time is 32 minutes with the machine agitating for the first 2 minutes. This is followed by 20 seconds agitation and 3 minutes soak cycle for the remaining 30 minutes. *ERROR SIGNALS: During operation, if any malfunction or misoperation occurs, the timer automatically indicates the same to he user through an appropriate error signal.
Wiring Diagram This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
PROGRAM TIMIMG (TIME IN MINUTES) OPERATION Sequence Agitronic Soak Fill Soak/Agitation NORMAL 32 Agitation Soak/Agitation 14 - Agitation Drain,Max SIS Spin Fill Agitation Drain,Max SIS Spin 4 2 2 8 72 Wash RINSE SPIN TOTAL TIME(Excluding fill) Wash Program SPEEDY DELICATE HEAVY 32(By 32(By selection) selection) 8 4 4 4 4 4 2 2 4 30 2 4 2 4 26 14 4 2 4 4 2 8 56 Note: 1.Fill time not included in the above table. 2.
USER INSTRUCTIONS ? Load Laundry ? Fill required amount of Water Manually ? Add Detergent and Adjuncts as required ? Program the machine (Normal/Wash) ? Press Start ? M/C Washes as per the program and stops ? ? Water filling should be controlled manually. The in built pressure switch is provided to ensure minimum water level of 25 Ltrs. thus avoiding agitation without water. Fill fresh water for rinsing operation.
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Modified parts list follows This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
PARTS LIST Part Code Description P0132003300 ACCEPTANCE STICKER P014290020A ADHESIVE TAPE - WHIRLPOOL P010110010E AGITATOR P010113020A BALANCE RING ASSY (APWH) P0129130100 BASKET ASSY. COMPLETE - AGI PL5 S012620010A BEARING-BALL SEALED P012900010A BRACKET SUSPENSION P010111500D BRACKET-CAPACITOR P010111140B BRAKE & ARM ASSY. P0125210100 BUSH - CABINET P010111400A CAM RING-SPLUTCH P010111520B CAM-SPLUTCH P0168160200 CAPACITOR- 110V/50HZ S014010100A CLAMP - ID 13.9/13.3 S014010010A CLAMP-33 DIA.
Part Code P014320020A P0143200600 P012960190E P012960180G P012960170C P012960040B P0129901700 S0116300100 P010111130C P012911040A P0168160300 P0173110500 P0168114100 S011590010A S011590020B P012990160A P0168540100 P0106900900 P03CA10060C P012930130A P011650010C P012941010H P0168400700 P010111150E P013822040A P0173220100 P011114020B P010113110B P010111510D P010111070E S011600250A P010111390A P0101101100 P010100010A P010110030A P011114010B P010114020G P010100020A P012930140D P011210040B P0168310300 P016831010
Part Code S0140000100 P0168800100 S011600070A S0116001900 S0116001600 S0116001800 P010171140E S0116000100 P0168310200 S0140000200 P0168160500 Description TWIST CLIP USER MANUAL - A/S 110V, WASHER WASHER - 4.75 X 12 X 1.2 THK. WASHER (13 X 23 X 1) WASHER (9 X 17 X 1.
Chk the power supply at brake solinoid, is it 110 V This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.