Instruction Manual

Drying tips
FLUFF AIR
TUMBLE PRESS Setting
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, pillows and clothing or to
dust drapes.
It can also be used to damp-dry
heat sensitive items...such as plastic
shower curtains, rubber-backed
rugs, plastic tablecioths, foam rubber
pillows, stuffed toys, sneakers, etc.
A
WARNING: Drying plastic or
rubber items with heat may
damage the items or be a FIRE
HAZARD.
1. Set the Temperature Selector to
FLUFF AIR.
2. Set the Control Knob to the PERMA
NENT PRESS Cycle and select the
number of mintues you want.
3. Push the START Button.
Mixed loads
When drying a ioad with different
kinds and weights of fabrics, use the
cycle suggested for the lightest fab
rics. When the dryer stops, remove dry
items and reset the controi.
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1. Set Temperature Selector to PERM'T
PRESS/HEAVY HIGH.
2. Set Control Knob to TUMBLE PRESS.
3. Push START Button.
The load will tumble in heated air
for 5 minutes. The heat shuts off and the
dryer continues to tumble the load
for 10 more minutes.
For best results, TUMBLE PRESS only a
few items at a time. Put them on hang
ers or fold them as soon as the dryer
stops.
Drying times
Drying times will vary depending on:
• amount of moisture in the clothes.
• type and weight of the fabric.
• size of load.
• room temperature around the dryer.
• temperature of the wash rinse water.
• amount of lint in the lint screen.
• dryer temperature selection.
See your "Dryer Guide" for more
information.