Instruction Manual

Lint screen

Clean the lint screen before each load. A screen blocked by lint can

increase drying time and may be a FIRE HAZARD,

Open the lid and pull the lint screen

straight out.

A WARNING: DO NOT run the

dryer with the lint screen

loose, damaged, blocked or miss*

ing. Doing so can cause overheat

ing, damage fabrics and be a

FIRE HAZARD.

ROLL the lint off the screen with

your fingers.

DO NOT rinse or wash the screen.

Push the screen firmly back into plaoe.

Lint removal

Lint can gather inside the dryer and create a FIRE HAZARD. This lint

should be removed at least every 2 to 3 years, or more often, depending

on dryer usage.

Cleaning should be done only by a qualified person.

^ WARNING:

• Avoid eiectrical shock

hazard - unpiug power supply

cord or turn off electrical power.

• Avoid injury or damage - do not

put hands inside cabinet.

• Make sure dryer is cool.

1. Remove back panel

2. Avoid damaging wires, or

thermostats.

3. Remove lint from shaded area -

see art - with a soft brush or

vacuum cleaner.

4. Replace panel; reconnect and

re-1 eve I dryer.