Installation

3
Optional tools:
Parts supplied:
NOTE: All parts supplied for installation are in cardboard
insert in the top of the washer.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather required tools and parts before starting installation.
4" min
(102 mm)
Wood block
Adjustable or open-end
wrench 14 mm (
9
⁄
16
")
Ruler or measuring tape
Level
Pliers that open to
44.5 mm (1
3
⁄
4
")
Flashlight Bucket
Cable tie
Tools needed:
Inlet hoses with flat
washers
“Y” connector
Drain hose with clamp
Plugs and cord lock cover
102 mm
(4" min)
Alternate parts: (Not supplied with washer)
IMPORTANT: Use only Whirlpool authorized parts.
WARNING: To avoid electrical shock, disconnect washer from
power source before replacing parts.
Your installation may require additional parts. To order,
please contact the dealer from whom you purchased your
washer or an authorized service company, or visit us at
www.applianceaccessories.com.
If you have: You will need:
Overhead sewer Standard 76 L (20 gal.) 990 mm (39")
tall drain tub or utility sink, sump
pump and connectors (available
from local plumbing suppliers)
25 mm (1") standpipe 51 mm (2") diameter to 25 mm (1")
diameter Standpipe Adapter Part
Number 3363920
Connector Kit Part Number 285835
Drain hose too short Extension Drain Hose Part
Number 285863
Connector Kit Part Number 285835
Lint clogged drain Drain Protector Part Number 367031
Connector Kit Part Number 285835