User's Manual

7
4. Select a temperature setting on models with a Temp/Fabric
selector. The cycle descriptions include temperature setting
suggestions.
NOTE: The temperature selector is part of the Cycle Control
knob on some models.
5. Select the End of Cycle Signal, if available. The signal is
helpful when drying permanent press or synthetics. Promptly
remove these items from the dryer at the end of the cycle to
help keep wrinkles from forming.
On some models you may have:
An automatic End of Cycle Signal that will sound when
cycle is completed.
An End of Cycle Signal that can be adjusted. Turn the
selector to the desired volume.
An End of Cycle Signal that is part of the Start button. Turn
the Start button to ON or OFF.
6. Select the desired option. See Additional Features.
7. Press the Start button.
Stopping and Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
1. Close the door.
2. Select a new cycle and temperature (if desired).
3. Press the Start button.
Drying, Cycle and Temperature Tips
Select the correct cycle and temperature for your load.
Cool Down tumbles the load without heat during the last few
minutes of all cycles to make the load easier to handle.
Drying tips
Follow care label directions when they are available.
If desired, add a fabric softener sheet. Follow package
instructions.
Remove the load from the dryer as soon as tumbling stops, to
reduce wrinkling. This is especially important for permanent
press, knits and synthetic fabrics.
Cycle and temperature tips
Dry most loads using the Energy Preferred setting, if available
on your dryer.
Use a High heat setting for drying heavyweight items such as
towels and work clothes.
Use a Medium heat setting for drying medium-weight items
such as sheets, underwear, permanent press fabrics and
some knits.
Use a Low heat setting for drying lightweight items such as
lingerie, blouses, dresses and some knits.
Use a no-heat (air) setting for rubber, plastic or heat-sensitive
fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions. If you are unsure
of the temperature to select for a load, select a lower setting
rather than a higher setting.
Cycle Descriptions
This manual covers several different models. Your dryer may vary
from the model shown and may not have all of the cycles and
features described.
Cycle Control knob
Automatic dry cycle(s) (on some models)
Use your Automatic cycle to dry most loads. Your dryer has a
control that senses the moisture level in the load and shuts off
when the load reaches the selected dryness.
On some models
Automatic Dry (High Heat) and (Low Heat)
Select the temperature by moving the Cycle Control knob
toward Very Dry for bigger or heavier loads or Less Dry for
smaller or lighter loads.
Auto Dry
Select the temperature from the temperature selector based
on the fabrics in your load.
After drying a load in any of the Automatic cycles, check the
dryness.
If the load is drier than you like, select a setting closer to Less
Dry the next time you dry a similar load.
If a load is not as dry as you like, complete drying using a
timed cycle. Select a setting closer to Very Dry the next time
you dry a similar load.
NOTE: Drying time varies with an Automatic cycle. The type of
fabric, the size of the load, and the dryness selected affect drying
time. See Drying, Cycle and Temperature Tips.
Timed Drying cycle(s)
Select the correct Timed Drying setting and temperature for your
load.
Use a longer Timed Drying setting for heavyweight and bulky
items, such as bedspreads and work clothes, or large loads that
require a long drying time. Set the temperature selector, if
available, to High Heat.
Use a shorter Timed Drying setting for lightweight items such as
lingerie or knits. Set the temperature selector, if available, based
on the fabrics in your load.