UNDERCOUNTER DISH WASHER Use & Care Guide
Table Of Contents
- you are responsible for
- table of contents
- important safety instructions
- energy saving tips
- using your dishwasher
- before starting your dishwasher
- starting your dishwasher
- cycles and options (models with one cycle)
- cycles and options (models with three cycles)
- cycles and options (models with three buttons)
- cycles and options (models with five buttons)
- cycles and options (models with seven buttons)
- to add a dish after starting
- changing a setting
- proper loading
- adding detergent
- using rinse agent
- for best results
- dishwasher care and cleaning
- common dishwashing problems
- before you call for service
- warranty
Cycle and options (models with one cycle)
Cycle control knob
Wash cycle
A
double wash for moderate to heavily
soiled loads.
Select the mark next to WASH with the
Cycle Control Knob. The cycle sequence
will be:
Wash+ Rinse+ Rinse+ Wash+ Rinse-r
Rinse+ Rinse+ Dry-+ Off
Dry Select options
If the HEATED DRYING Option Selector
Button is pushed, air in the dishwasher
is heated during the “dry” part of the
cycle.
For best drying results, use a liquid rinse
agent.
Cycles and options (models with three cycles)
Optlon selector button
If the ENERGY SAVER Option Selector
Button is pushed, air in the dishwasher
is not heated. Using this option helps
save energy, but dishes take longer to
dry (overnight) and some water spotting
may result. Some items (such as plastics)
may need towel drying.
For best drying results, use a liquid rinse
agent.
Cycle control knob
Nomal Wash cycle
A double wash for normal, everyday
loads. (The Energy Guide Label Data is
based on this cycle.)
Select the mark next to NORMAL WASH
with the Cycle Control Knob. The cycle
sequence will be:
Wash-Rinse+Rinse+Wash+Rinse-+
Rinse+ R.inse-+Dry+Off
Light Wash cycle
A single wash for pre-rinsed or lightly
soiled loads.
Select the mark next to LIGHT WASH
with the Cycle Control Knob. The cycle
sequence will be:
Rinse & Hold cycle
For rinsing a few items to be washed
one or more days later.
Select the mark next to RINSE % HOLD
with the Cycle Control Knob. Push the
ENERGY SAVER Option Selector Button.
Using the Heated Drying option may
cause food to bake onto dishes. Do not
use detergent. The cycle sequence will
be:
Rinse+Rinse-+Off
Dry Select options
If the HEAT DRY Option Selector Button
is pushed, air in the dishwasher is
heated during the “dry” part of the
cycle.
For best drying results, use a liquid rinse
agent.
If the ENERGY SAVER Option Selector
Button is pushed, air in the dishwasher
is not heated. Using this option helps
save energy, but dishes take longer to
dry (overnight) and some water spotting
may result. Some items (such as plastics)
may need towel drying.
For best drying results, use a liquid rinse
agent.
Page 4