Service manual

2-3
MOTOR
Violet
Indicator
Indicator
Orange
Indicator
Black
Black
Red
Black
Black
Violet
White
White
Black
Blue
Violet
Gray
Orange
Brown
White
6. To remove the indicator lamp, pull it out
of the control housing and disconnect the
wires from the two slide switch terminals.
7. To remove the blower motor:
a) Remove the three screws from the
motor mounting brackets on both sides
of the blower motor (6 total).
b) Disconnect the wire connectors from
the slide switch terminals.
Indicator Lamp
Blower Motor
Screw
Screw
Screw
Control Assembly Wiring
Continued on the next page.