Use and care guide

14 | USING THE GLASS TEA KETTLE
USING THE GLASS TEA KETTLE
NOTE: For tea that does not include
brewing directions, start with 15 g per
300 ml cup� Add more tea if the flavour is
too weak, and less tea if the flavour is too
strong� Experiment for the best flavour�
TIP: For best results, we recommend pre-
wetting the tea leaves in the steeper with
a little warm water before the steeper is
added to the kettle� (This can be done
while the steeper is in the steeper holder)�
This will allow the leaves to settle into the
steeper during the steeping process�
5
While the water is heating, place the
tea steeper in the tea steeper holder
to keep it steady while filling it with
tea leaves (or tea bags)� Follow the
instructions on the tea packaging for
the amount of tea to use�
OPTIONAL: To boil water instead of
steeping tea, slide the temperature
selector to HERBAL (100°C)�
6
Once the water reaches the correct
temperature for brewing your
selected tea, a chime will sound
and the light around the I/O (on/off)
button will stop flashing, but remain
lit, indicating that the water is ready
for steeping the tea�
7
Remove the tea steeper lid from the
kettle after the desired temperature
is reached�
W10837036A_ENv04.indd 14 4/18/16 2:49 PM