Use and care guide

16 | USING THE GLASS TEA KETTLE
USING THE GLASS TEA KETTLE
12
Hold the tea steeper lid in one
hand, and grip the tea steeper
holder in the other hand� With slight
downward pressure, rotate the tea
steeper lid off of the tea steeper�
Then, place the tea steeper lid back
inside the kettle lid, twisting to lock
into place�
13
The kettle automatically goes
into Warm mode after reaching
temperature and holds for 30
minutes at Warm (70°C)� The light
around the I/O (on/off) button will
remain lit while the Glass Tea Kettle
is in Warm mode� If the kettle is
removed, to keep the kettle warm
after replacing it on the base, slide
the temperature selector over to
WARM and press the I/O (on/off)
button again�
NOTE: Use the handle to remove� The
steeper cylinder will be hot�
TIP: If the tea steeper lid is stuck on the
tea steeper, this issue may be caused by
twisting the tea steeper lid too tightly
onto the tea steeper� Use a slight pressure
to rotate the tea steeper lid when placing
on the tea steeper� Do not over-rotate�
W10837036A_ENv04.indd 16 4/18/16 2:49 PM