Installation guide

Remove hinge and latch

Hinge

Using a TORX T25®screwdriver, remove the 3 TORX ®screws

securing the latch plate and latch backing plate and the

5 screws holding the hinge assembly in place.

9. Reinstall inner door assembly

: 9 Bottom

of door

Position the door with the inside of the door facing up.

Reinstall the 10 screws securing the inner door to the

outer door.

8. Reinstall hinge and latch on

opposite sides

Using a TORX T25 ®screwdriver, reinstall the latch plate, latch

backing plate, and hinge assembly on the opposite sides from

which they were removed.

Using a TORX T25®screwdriver, remove the 4 screws on the

dryer. Insert the tabs on the hinge into the mounting slot and

slide down to engage the top tab. Secure in place with the

4 TORX T25 ®screws removed earlier.