Instruction for Use

Problem Possible cause Solution

The appliance has just been

connected to the electricity mains

or there has been a blackout.

Set the clock.

A programmed cooking mode

does not start.

There has been a blackout. Reprogram the cooking mode.

Only the high luminosity

“Clock button” is lit.

The appliance is in standby mode Press any button to exit

standby mode.

The temperature inside the oven

is higher than the suggested

value for the selected mode.

Wait for the oven to cool down.

Fan-assisted cooking has been

selected and the food looks burnt.

Positions 1 and 5: the direct

heat could cause

temperature-sensitive

foods to burn.

We recommend switching

dripping pan positions halfway

through cooking.

The “Clock button” and the

digits on the display flash.

An automatic mode has been

selected. “Hot” appears on the

display and cooking does not

start.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait

for the

icon to switch off: this indicates the oven

temperature has dropped to an acceptable level. You will

notice some white dust deposits on the bottom and the sides

of your oven; remove these deposits with a damp sponge

once the oven has cooled down completely. Alternatively,

you can make use of the already heated oven, in which

case it is not necessary to remove the deposits, they are

completely harmless and will not affect your food in any way.

Troubleshooting