Installation guide

Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
5 | Check inner spacing
oN
i
7
:
ot
Yi
<>
gag
»
TS
Ke
a
ae
eel
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws secured and shift tub. Tighten bracket
screws.
Check side attachment
plastic
button
VO
‘ g
If securing with a side attachment, replace plastic buttons.
22
Remove towel from dishwasher. Reinstall the lower dish rack.
If needed, see website for animated representation of this step.
Visit www.whirlpool.com/anchoring under FAQ tab.
GO 0m, wang, "y 4
Comple
Insulation
(on.some models) :~
Place the plastic access panel against the dishwasher leg.
2? | Check access panel edge
| Se
—
oN
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.