Dishwasher Use & Care Guide

Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
For Serbs 400,800, and 810 models: Turn Cycle Control Knob to desired cycle.
For Series 830 models: Press POTS & PANS button for that cycle. Or press either HEAT
DRY or AIR DRY for NORMAL WASH and LIGHT WASH cycles. Press AIR DRY for RINSE
8 HOLD cycle. Turn Cycle Control Knob to desired cycle.
For Serfes 840 models: Press a cycle pad, then turn the Cycle Control Knob to desired
cycle. NORMAL WASH, LIGHT WASH, and RINSE & HOLD all share the same cycle pad.
NOTE: Your model may have all or some of the cycles shown.
NORMAL WAS
soiled loads. (The Energy
Guide label is based on this
RINSE & HOLD
oneorrnore
l Do not use detergent.
l Use AIR DRY option.
‘C