Troubleshooting guide

GB 4
INSTALLATION
TRANSPORT/HANDLING
Remove the transport bolts
1.
Loosen the three or four bolts (
A
).
2.
Unscrew the bolts by hand.
3.
Take hold of the bolts and plastic spacers and
remove them. Keep the transport safety bolts for
possible future use.
4.
Close the holes with the plastic covers (supplied
with the documents).
Never lift the appliance by the worktop when transporting.
1.
Unplug the appliance.
2.
Shut off the water tap.
3.
Check that the door and detergent dispenser are properly closed.
4.
Remove the water supply and drain hose from the domestic connection.
5.
Remove any water remaining in the hoses and the appliance (see “Removing The Filter/Draining
Residual Water”).
6.
Pry off the plastic covers with a screwdriver and remove them.
7.
Insert the transit screws following the removal procedure in reverse.
A
B
A
A
A
A
B
1
4